User guide

Operating the Smart 108/116 IP Switching System Locally
Using the OSD
User Guide | 71
Serial Port
This option is disabled in Smart 108/116 IP. Leave this option on its default setting
ON.
Changing the Keyboard Language
The keyboard language is preset to US English. You can change the keyboard language
to French (FR) or German (DE).
To change the keyboard language:
1. In the General settings window (see Figure 54), navigate to the Ke
yboard Language
line.
2. Press the Space bar to toggle between the available options.
Editing the Switch Name
The Switch name is displayed under Switch Name in the General settings window (see
Figure 54). You can substitute up to 18 characters in the line; a space is considered a
character.
When there is more than one switch in the system, give each Switch’s OSD
a different name.
Restoring OSD to Factory Defaults (F7)
In the General settings window (see Figure 54), you can press F7 to restore the OSD
to its factory default settings.
Restoring factory default settings erases all changes that have previously been
made.
6.2.5 Configuring the Ports Settings
From the Ports settings window, you can configure the following:
 The Computer name
 The Keyboard settings
To configure the ports settings:
1. In the OSD Settings window (see Figure 53), navigate to PORTS
so that the red
line is on it, and press Enter.
The Ports Settings window appears.