User guide

Operating the Smart 108/116 IP Switching System Locally
Using the OSD
User Guide | 69
 Keyboard language
 Switch name
From this screen, you can also restore the OSD to its factory default.
To configure the general settings:
1. In the OSD Settings window (see Figure 53), navigate to GENERAL s
o that the red
line is on it, and press Enter.
The General Settings window appears.
Figure 54 – General Settings Window
Configuring Security Settings
The OSD comes with an advanced password security system that contains three
different security levels. Each security level has different access rights to the system,
as follows:
 Administrator (Status A) who can:
 Set and modify all passwords and security profiles
 Fully access any computer
 Use all OSD functions
 Supervisor (Status S) who can:
 Fully access any computer
 Access the following OSD functions only – F4 Scan, F5 Tune, and F6 Moving
the Confirmation label.
 User (Status U) – There are six different Users in the Smart 108/116 IP system.
Each User has a Profile set by the Administrator that defines the access level to