User guide

Operating the Smart 108/116 IP Switching System Locally
Using the OSD
User Guide | 67
Figure 52 – OSD Main Window
Lines with yellow text show active computers. Lines with blue text show inactive
computers. The Type column indicates that a computer “C” is connected to the
port.
6.2.1 Navigating the OSD
You can navigate the OSD, as follows:
 To move up and down
– Use the Up and Down arrow keys.
 To jump from one column to the next (when relevant)
– Use the Tab key.
 To exit the OSD or return to a previous window within the OSD
– Press Esc.
6.2.2 Selecting a Computer
To select a computer:
1. Navigate to the desired computer line.
OR
Type the port number of the desired computer.
2. Press Enter.
The selected computer is accessed. A Confirmation label appears showing which
computer is accessed.
When the OSD is displayed, you cannot select computers using the keyboard
hotkeys.