User guide

Troubleshooting – Safe Mode
Restoring Factory Defaults
64 | Smart 108/116 IP
5.2 Restoring Factory Defaults
You can restore all Smart 108/116 IP settings to their default values.
To restore factory defaults:
1. In the Safe Mode menu (see Figure 47), click Restor
e Factory Settings.
A warning appears.
Figure 48 – Warning
2. Click
.
An additional warning appears.
Figure 49 – Additional Warning
3. Click OK
.
The factory defaults are restored. When the process finishes, the following figure
appears.
Figure 50 – Reboot
4. Click Reboot to restart the unit.
5.3 Restoring the Device Firmware
To receive the Upgrade firmware required to restore the device firmware, contact
Minicom Technical Support
[e-mail]. Save the Upgrade firmware on
the hard disk of a computer connected to the network.