User guide

Configuring the Network
Configuring User Settings
32 | Smart 108/116 IP
2. Select the Enable Traps checkbox to enable SNMP traps of Smart 108/116 IP events
and operation.
3. In Community, type the name of the SNMP community.
4. In SNMP Manager IP, type the SNMP Server IP address.
3.5 Configuring User Settings
An Administrator can add, edit, remove, and block Users.
There are two levels of user access:
 Administrator – has unrestricted access to all windows and settings, and can
change the name and password of all users
 User – can access and control target servers, but cannot use advanced mouse
settings and power cycle; cannot access the Web configuration interface
3.5.1 Adding a User
To add a User:
1. From the configuration menu, select Users.
The Users page opens and displays the existing Users.
Figure 16 – Users Page
2. Click the Add button.
The Add User page appears.