User guide

Configuring the Network
Configuring Network SNMP Settings
User Guide | 31
environment. The Centralized Management systems combine out-of-band KVM via IP
access with modern IT standards and requirements. They are the most
comprehensive remote server maintenance solutions available in the market today.
To configure Centralized Management settings:
1. Select the Enable Centralized Management checkbox to enable Smart 108/116 IP to
be remotely managed by a Centralized Management system.
When managed by Centralized Management, only Network Configuration is
available from the Smart 108/116 IP configuration page. All other settings, such
as Device Upgrade, Factory Restore, and SSL Certificate are disabled and are
managed from Centralized Management.
2. Select the Manager Auto Discovery checkbox to cause the Centralized Management
system to automatically detect Smart 108/116 IP, if they both reside on the same
network segment.
OR
In Manager IP Address, type the static IP address of the Centralized Management
Manager.
Although not required, it is recommended to type the Manager IP Address even
if the Smart 108/116 IP resides on the same network segment as the
Centralized Management Manager.
3.4 Configuring Network SNMP Settings
You can activate SNMP logging to provide support network monitoring. This will cause
the Smart 108/116 IP to send monitoring events (such as log entries) to the SNMP
server. See Chapter 9 for a list of all recorded SNMP events.
To enable and configure SNMP logging:
1. From the configuration menu, select SNMP.
The SNMP page opens.
Figure 15 – SNMP Settings