User guide

Configuring the Network
Configuring the Network Settings
User Guide | 29
Tab Description
Device
For configuration of the device settings, IP address, and centralized management
SMNP
For configuration of network SNMP settings
Users
For adding, editing, deleting, and blocking system Users
Switch Configuration
For configuration of the KVM switch settings
Serial Port
Not in use
Security
For configuration of the security settings
3.2.2 Web Configuration Toolbar Buttons
The following table describes the functionality of the Web configuration toolbar
buttons.
Button Functionality
Saves the configuration changes
Reloads the device settings into the configuration page parameter settings
Reboots the device
Upgrades the device firmware
Restores the device with factory settings
Installs the SSL certificate onto the device
3.3 Configuring the Network Settings
On the network configuration page (see Figure 14), you can configure the following:
 Device ID
 Device IP address
 Centralized Management
Consult your Network Administrator for the network settings.
3.3.1 Configuring Device ID Settings
You can assign a name to the Smart 108/116 IP device, and select a TCP port.
The default device name consists of the letter ‘D’ followed by the 6-digit device
number (D.N.), which is printed on the silver label on the underside of the Smart
108/116 IP box.