User guide

Installation
Rack Mounting the Smart 108/116 IP Unit
User Guide | 19
2.4.2 Mounting the Unit
You can connect the Smart 108/116 IP unit to a server rack, using the supplied rack
mounting kit. The brackets can be placed in two possible positions, as illustrated in
the following figure.
Figure 3 – Bracket Positions
To rack mount the Smart 108/116 IP unit:
1. Place the brackets on the unit in either of the following ways:
 Towards the front of the unit so that the unit can be mounted front facing
 Towards the rear of the unit so that the unit can be mounted rear facing
Figure 4 illustrates the bracket con
nected for rear facing.
2. Screw the bracket to the Smart 108/116 IP unit using the screws provided.
Figure 4 – Bracket Connected for Rear Facing