User guide

SMART IP EXTENDER
Figure 33 Button Press Durations box
External Power Option
To configure the External Power Option connected to Serial port 2, click change
external power switch option.
SPC 800/1600 - Using the Avocent
TM
SPC, switch power for more than one system
connected to IP Extender through a KVM switch. To use this device enter a
username and password, which exist on the SPC and have the privileges to switch
power for each port.
Intelligent Power Module - External module option to switch power of a single
system by putting it in the power supply line of the controlled system.
ePowerSwitch 4 port- Using this switch, switch power for more than one system
connected to IP Extender through a KVM switch.
ePowerSwitch-Slave – This switch is cascadable to up to 4 power sockets with 8
ports. IP Extender must be connected to the first socket of the cascade via a serial
connection.
Spectrum Control Inc. - Smart Start Jr. – Check the box if this option is connected.
49