User guide

SMART IP EXTENDER
Figure 24 Custom Video Modes window
Custom Modes Handling – switch custom modes off, or use in addition to the
standard video resolutions, or use exclusively - Only. With Only you can force a
special video mode for IP Extender.
To change the parameters for a mode, choose the number and press Update.
X Resolution - Visible num
51.
ber of horizontal pixels.
Y Resolution - Visible number of vertical pixels.
Horizontal Frequency (Hz) - Horizontal (line) frequency.
Vertical Frequency (Hz) - The vertical (refresh) frequency.
Total horizontal pixels - The total amount of pixels per line, including non-visible
and blank areas.
Polarity - The polarity (positive/negative) of the synchronization signals. V means
vertical, H means horizontal.
Description Give the mode a name. The name appears in the Remote Console when
the custom mode is activated.
User/Group Management
From the IP Extender Menu choose User/Group Management. The User/Group
Management settings appear. See Figure 25. The user and group management of IP
Extender is based on configurable users and groups. Each user or group can have
different access capabilities.
35