User guide

USER GUIDE
47.
48.
49.
50.
Enable local video port
This option decides if the video output on the front panel of IP Extender is active
and passing through the incoming signal from the host system.
Noise filter
Define how IP Extender reacts to small changes in the video input signal. A large
tolerance needs less network traffic and leads to a faster video display, but small
changes in some display regions may not be recognized immediately. A small
tolerance displays all changes instantly but may lead to a constant amount of
network traffic even if display content is not really changing (depending on the
quality of the video input signal). The default setting should be suitable for most
situations.
Video quality/speed
Choose the Video quality/speed, the faster the speed the lower the video quality.
Custom Video Modes
Add video modes to IP Extender, which are not recognized using the factory
settings, when for example using special modelines in an X-Window configuration
on the host or with uncommon hosts or operating systems.
Click Add Custom Video Modes. The Custom Video Modes window appears, see
Figure 24.
Note! This option may affect the correct video transmission and is for advanced
users only.
The maximum number of custom video resolutions is 4.
34