User guide

IP CONTROL
7
Screw L-shaped
brackets to 1 or both
sides of the unit
Figure 4 Connecting the L-shaped bracket
Figure 5 Connected to a rack
Figure 6 Connected to a table top
8. Terminology
Below are some terms and their meanings used in this guide.
Term Meaning
Target server The computers/servers that are accessed remotely via the IP
Control.
Client computer The PC running a remote IP Control session
Remote Session The process of accessing and controlling Target Servers
connected to IP Control from a User workstation
9. Client computer operating system
Windows 2000 or higher, with Internet Explorer 6.0 or later version. 128 bit
encryption support is required.
10. Connecting the system
Connect the Target Server / KVM switch to the IP Control as follows:
1. Connect the single connector of the KVM cable to the KVM In port of the IP
Control.