User guide

USER GUIDE
32
2. Wait until the unit finishes booting (1-2 minutes).
3. You need to know the IP address of the IP Control. The IP address depends on
whether there is a DHCP server on the network. If there is, the DHCP server
assigns an IP address to the IP Control. If there is no DHCP server, the unit
boots with the static IP address 192.168.2.155. See Figure 31 for an overview of
this procedure.
Figure 31 Safe mode procedure
Open Internet Explorer and type the following into the Address box: http://IP
address/config. (Do not start the address with https). The Login page appears,
see Figure 32.
Figure 32 Login page
4. Type username: admin , password: SAFEmode. (Case sensitive). (This
username and password works only in Safe mode). A menu appears, see Figure
33.