User guide

IP CONTROL
23
To minimize the Toolbar:
Click the arrow . Click again to maximize the Toolbar.
23.3 Switching to a different server/device
To connect to a different server/device:
1. From the Toolbar, click , or right-click . A list of connected
servers/devices appears.
2. Click the desired server or Serial device. The screen of the server or the Serial
device window appears.
23.4 Changing the performance settings
In a LAN environment, it is best to leave the bandwidth setting on High. For VPN
and internet environments you may want to alter the settings to increase
responsiveness.
You can alter the bandwidth settings from the Toolbar.
To alter the settings:
From the Toolbar, click . The Settings.. box appears, see Figure 23.
Figure 23 Settings.. box
Bandwidth
Choose from the following options
Adaptive – automatically adapts to the best compression and colors according to
the network conditions.
Low - Select Low for high compression and 16 colors.