User guide

USER GUIDE
16
16. Administration > Switch Configuration
When a KVM switch is connected to the IP Control system, you must configure the
switch parameters.
To do so:
1. From the menu click Switch Configuration. The KVM Switch Configuration
window appears, see Figure 14.
Figure 14 Switch Configuration
2. Choose the manufacturer and model of the connected KVM switch. The number
of possible connected servers appears in the Server Name section.
3. Change the name of the connected servers by highlighting the server and typing
a new name. Click to save changes.
Note! Server names left as UNUSED cannot be accessed.
Install switch definition file
Where the KVM switch type is not listed in the manufacturer/model drop-down
lists, you can find the correct Switch Definition file in the Support section of our
website - http://www.minicom.com/phandlj.htm.
1. Load the file onto the Client computer.
2. Locate and install the KVM switch definition file. The switch definition file is
replaced.