User guide

IP CONTROL
13
13.2 KVM.net
KVM.net is a centralized IP based system for secure control of servers and network
devices, power and user administration in the data center environment. KVM.net
combines Out-Of-Band, KVM via IP access with modern IT standards and
requirements. It is the most comprehensive remote server maintenance solution
available in the market today.
Enable KVM.net - Check this option to allow IP Control to be remotely managed
by Minicom’s KVM.net system.
Manager Auto Discovery – when checked, KVM.net automatically detects the IP
Control, if it resides on the same network segment.
Manager IP – If IP Control resides on a different segment, type the static IP
address of the KVM.net Manager. (We advise typing the static IP address of the
KVM.net Manager even if the IP Control resides on the same network segment as
the KVM.net Manager).
14. Network > SNMP settings
From the menu click SNMP settings. The following appears.
Figure 12 SNMP settings
From this page you can activate or deactivate SNMP logging.
Enable traps - Check to enable SNMP traps of IP Control events and operation.
Community – type the SNMP community.
SNMP Manager IP - Enter the SNMP Server IP address.