User guide

USER GUIDE
10
IP address is assigned by the DHCP server
Yes
Unit boots up
To access the configuration page of the unit, open IE 6.0 or higher and type:
https://IPaddress/config
Default user: admin
Default password: access
Set static IP
(deselect the DHCP
and set the IP)
Yes
The unit operates with the static IP address
No
Device network setting
is set to obtain IP address from
DHCP Server
Yes
No
Is DHCP Server
present in the
connected LAN?
No
Every 5 minutes
Device IP is:
192.168.0.155
Figure 9 Boot-up process
11.1 Static IP addresses for a number of units
Where you want to connect more than 1 IP Control to the same network and there
is no DHCP server, or you want to use static IP addresses, do the following:
Connect the IP Control units one at a time and change the static IP address of each
unit before connecting the next unit.