User guide

USER GUIDE
34
Figure 25 The Video Adjustments controls
Video Adjustment controls
Move the sliders to change the displayed image. Click in the area of the sliders for
fine-tuning.
Brightness / Contrast - use the scales to adjust the brightness and contrast of the
displayed image.
Horizontal Offset - defines the starting position of each line on the displayed
image.
Vertical Offset - defines the vertical starting position of the displayed image.
Phase - defines the point at which each pixel is sampled.
Noise Level - represents the Video "noise" when a static screen is displayed.
RTT
RTT – Round-trip-time is the time it takes, (in milliseconds) for a packet to travel
from the Client computer to the Smart IP Access and back. (RTT measurement is
ICMP based, similar to the 'Ping'. Note that if Ping is blocked, the RTT will show a
Timed Out value).