User guide

SMART IP ACCESS
19
Figure 11 Serial Settings
For both Serial ports (where relevant), type in a device name and choose the correct
device parameters.
Show
Check Show to make the device appear in the list of servers/devices that can be
accessed. Where there is no device connected to the particular Serial port uncheck
Show.
18. Security
From the Security section if the menu click Settings, the Security Settings page
appears, see Figure 12.
The security page elements:
Account Blocking – decide on the number of attempts to login with a wrong
username or password after which there is a time lock or a total block.
Password Policy – Check the box to enable the high security password policy.
Unchecked, the standard security policy applies.
Standard Security Password High security Password
Any 6 characters 8 characters or more must
include at least 1 digit and 1
upper case letter and 1 “special”
character as follows
!@#$%^&*()_-+={[}]”’:;?/><
Must not include the user name Must not include the user name