User guide

USER GUIDE
18
Figure 10 Switch configuration
1. Choose the manufacturer and model of the connected KVM switch. The number
of possible connected servers appears in the Server Name section.
2. Change the name of the connected servers by selecting the server and typing a
new name. Click
to save changes. Note! Server names left as
UNUSED cannot be accessed.
Install switch definition file
Where the KVM switch type is not listed in
the manufacturer/model drop-down
lists, contact Minicom to request an updated Switch Definition file with the
desired KVM switch listed.
1. Load the file onto the Client computer.
2. Locate and install the KVM switch definition file.
3. Click
.
17. Serial Settings
From the menu click Serial Settings, the Serial Settings page appears, see Figure
11. Here you configure the RS232 settings that support Serial devices.