User guide

DX USER IP II
25
20.1 Standalone and KVM.net Enabled modes - DX AIM
configuration
For KVM.net managed mode, go to section 20.2.
From the Tools menu click Settings, the Settings window appears. See Figure 25.
Figure 25 Settings window
In Settings, ensure that Direct Hotkey is set to CTRL-CTRL (default).
In Extensions, select Enable Direct Connection and Use consistent hotkey.
To save changes click File/Save changes, or .
20.2 KVM.net managed mode - DX AIM configuration
If the DXU IP II is being used as a Master Console, ensure the Serial cable is
connected to the DX User IP II, see page 9. Also ensure the DX User IP II is
connected to the DX Central User port 1.
1. From the View menu choose DX System Configuration. The DX System
Configuration window appears. See Figure 26.