User guide

DX USER IP II
21
18.1 Entering Safe mode
To enter Safe mode:
1. Press and hold down the Go Lock button for 3-4 seconds and at the same time
power up the DXU IP II. The device boots up in Safe mode.
2. Wait until the unit finishes booting (1-2 minutes).
3. You need to know the IP address of the DXU IP II. The IP address depends on
whether there is a DHCP server on the network. If there is, the DHCP server
assigns an IP address to the DXU IP II. If there is no DHCP server, the unit boots
with the static IP address 192.168.2.155.
Open Internet Explorer and type the following into the Address box: http://IP
address/config. (Do not start the address with https). The Login page appears,
see Figure 17.
Figure 17 Login page
4. Type username: admin , password: SAFEmode. (Case sensitive). (This
username and password works only in Safe mode). A menu appears, see Figure
18.
Figure 18 Safe mode menu