User guide

USER GUIDE
18
14. Security > Settings
Note! This section is only relevant to Standalone mode.
Configure the security features, such as Account Blocking, Password Policy and Idle
Timeout, as explained below.
From the Security section click Settings, the Security Settings appear, see Figure
13.
Figure 13 Security Settings
The Security Settings fields:
Account Blocking – decide on the number of attempts to login with a wrong
username or password after which there is a time lock or a total block.
Password Policy – You have the option of a standard or high security level of
password. The table below shows the parameters of the 2 options.
Standard security policy High security policy
6 characters or more
8 characters or more must include at least 1 digit
and 1 upper case letter and 1 “special” character
as follows !@#$%^*()_-+=[]’:;?/
Must not include the user name Must not include the user name
Check the box to enable the high security password policy. Unchecked, the standard
security policy applies.
Idle Timeout – Select the Timeout inactivity period after which the user is
disconnected from the system. Choose No Timeout to disable Timeout.