Specifications

OPERATING GUIDE
2
Getting started
1. The initial cascade wizard
Once the system is connected and powered on, the Configuration Wizard box appears
on the screen of the DX User. See Figure 1.
Figure 1 The Configuration Wizard box
Important!
To define the Slave (second level cascade – see diagram below), you must physically
connect a DX User unit to the Slave. The initial cascade wizard appears and the
procedure outlined here must be followed.
POWER
100-250 VAC 50/60 Hz
www.minicom.com
ETHERNET
SERIAL
SERVICEI
0
1234
18 19 2017
SERVER
567 8
22 23 2421
123 4
6785
USER
9101112
26 27 2825
13 14 15 16
30 31 3229
DX Central
- Primary level
DX Central
- Secondary level
Cascade
Server
POWER
100-250 VAC 50/60 Hz
www.minicom.com
ETHERNET
SERIAL
SERV ICE
I
0
1234
18 19 2017
SERVER
5678
22 23 2421
123 4
6785
USER
9101112
26 27 2825
13 14 15 16
30 31 3229
Figure 2 Cascaded DX Centrals
1. Where the DX User connects to cascaded DX Central units check Cascaded DX
configuration. Otherwise click Single DX configuration.