Specifications

DX SYSTEM
15
Security elements
Security Off – When checked, there is no login screen. ALL Users have access to
control and power devices.
To again display the login screen:
From the File menu choose Log off. The Login screen appears and the Administrator
can enter his password.
Security On – When checked security access levels are as set by the Administrator
Security High – When checked Users must login every time they exit and re-enter the
AIM.
Lock configuration – When checked, the system will only recognize the current
devices configured. Any changes in the devices physically connected will not be
recognized by the system.
IP/Cascade Settings elements
IP Address – Type a Static IP address in the usual dot notation.
Subnet mask – Type the net mask of the local network.
Default Gateway – Type a Default Gateway address. Where the DX system is
accessible from networks other than the local one, this IP address must be set to the
local network router's IP address.
Configure cascade options – When you want to change cascade status of the DX
system click
. The Cascade configuration box appears. Make the desired
change.
Figure 20 Cascade configuration box
Time Settings
Set the time and date.