Specifications

DX SYSTEM
13
Figure 18 The Cascade Outputs box
Left Port No. A row appears for each output port of the new switch.
Name - From the Drop-down list select the device to which the new switch is
connected 1 level down.
Right Port No – Select the port number of the 1 level down device to which the new
switch is connected.
Do the above for each cascaded port.
Click OK.
Note! Once you have manually input the cascaded ports at one level you do not have to
repeat the process at the levels above or below.
Configuring individual output and input ports
Configure the individual output and input ports of cascaded units as explained in
sections
3 and 4 on pages 6 and 8 above.
Note! When configuring the output ports of a non-DX switch you must define the
hotkey to access the device. See the switch’s User guide for the correct hotkey.
To input the hotkey:
1. Click
. The HotKey box opens.
2. Press the hotkey keys on your physical keyboard. The keys appear in the HotKey
box.
3. Click Assign. The hotkey is assigned.