User Guide switch DX System

ManualsBrandsMinicom Advanced Systems ManualsSwitchDX System

Table Of Contents

Welcome
1. Introduction
- 1.1 Features
- 1.2 System components
- 1.3 Compatibility
2. Pre-installation guidelines
- 2.1 Avoiding general rack mounting problems
3. DX system outline
- 3.1 The DX Central
- 3.2 DX User units
- 3.3 Rack mounting the DX central and User units
- 3.4 Rack mounting the XRICCs
- 3.5 Rack mounting the RICCs
4. Connecting the DX system
- 4.1 Connecting an optional local computer to a DX User
- 4.2 Connecting servers to the DX Central
- 4.3 XRICC power supply
- 4.4 Connecting a RICC or XRICC PS/2
- 4.5 Connecting an XRICC SUN
- 4.6 Connecting an XRICC USB
- 4.7 Connecting an XRICC RS232
- 4.8 Connecting the CAT5 cables
- 4.9 Connecting the DX User to an RS232 Terminal
5. Power management
6. Connecting Legacy KVM switches
7. Cascading DX Central units
- 7.1 Connecting with an Ethernet Crossover cable
- 7.2 Connecting to a network hub/switch
- 7.3 Configuring the primary and slave units
- 7.4 Changing the cascade status
- 7.5 Connecting the DX Users when cascading
- 7.6 Connecting servers/devices in a cascaded system
8. Powering on the system
9. Configuration wizard (non-DX cascaded system)
10. Logging in
11. Configuring the DX system
- 11.1 Auto detecting system components
- 11.2 Applying changes
- 11.3 Cascaded DX Central units
- 11.4 Cascaded Legacy switches
- 11.5 Configuring a Power management device
- 11.6 Other settings to configure
12. Creating/editing Users and Groups
- 12.1 Toolbar buttons
- 12.2 Creating Groups
- 12.3 Editing Group access rights
- 12.4 Creating Users
- 12.5 Users and Groups - Details view
13. Arranging devices
- 13.1 The Servers window
- 13.2 Creating a new folder
- 13.3 Saving changes
- 13.4 Deleting and renaming folders
- 13.5 Adding devices to a folder
- 13.6 Servers/devices display options
- 13.7 Accessing devices
- 13.8 Power on/off, reboot
14. Scanning a group of servers
15. Adjusting the picture quality
16. Connect - Private
17. Disconnect User
18. Connecting to a local computer
19. Updating the DX Central
- 19.1 System requirements for the DX Central Update program
- 19.2 Running the DX Central Update
20. Updating the DX User and XRICCS/RICCs
- 20.1 DDC buttons
21. Events log
- 21.1 Configuring Log Traps
- 21.2 Clearing the Log
- 21.3 Saving the Log
22. Troubleshooting - Resetting the DX Central
23. USB / SUN Combo keys
- SUN key Combo key
24. Technical specifications
- System
- DX units
25. Terminal hotkeys
26. User guide feedback

USER GUIDE

10. Logging in

Once the system is connected and powered on, the Login screen appears on the

monitor of each DX User. See Figure 23.

Figure 23 Login screen

Type the default username ‘admin’ and password ‘admin’ (case sensitive). The

Servers window appears. See Figure 24. The screen initially shows no devices. To

display the devices the system must be configured, as explained below.

Servers / devices

appear here

Toolbar icons

Created folders

appear here

Figure 24 Servers window

11. Configuring the DX system

You must configure the system by inputting details of each server / device

connected to each DX Central. This is done in the DX System Configuration

window.

From the View menu choose DX System Configuration. The DX System

Configuration window appears. See Figure 25.

Note! Any change made to the DX system topology will automatically log out all

other users from the system.