User guide

USER GUIDE
20
Figure 5 Password box
Type a user name and password.
With the administrator name (default admin) and the administrator password
(default admin), you can control all the power sockets and configure all the
parameters of the DX Power Switch-Standalone.
With a User name and password you can control the sockets.
Socket status
Power
management
buttons
Figure 6
For each socket the power status is shown – on, off or restart. Click the appropriate
button to switch on / off and restart the controlled power outlets. For the restart it
will automatically switch on after the delay set by the administrator during the
configuration (default value is 5 sec).