User guide

USER GUIDE
18
Example 3
Permit access to IP addresses beginning with 192 only
Deny access to IP address 192.168.001.010
Mask IP Address Permit Deny Activated
#1 192.168.001.010
ü ü
#2 192.255.255.255
ü ü
#3 255.255.255.255
ü ü
Example 4
Permit access to IP addresses beginning with 192.
Deny access to address 192.168.001.010.
Permit access to IP addresses beginning with 217.128.103.
Mask IP Address Permit Deny Activated
#1 192.168.001.010
ü ü
#2 192.255.255.255
ü ü
#4 217.128.103.255
ü ü
#3 255.255.255.255
ü ü
10. Serial port pin configurations
DX Power Switch-Standalone
SUB-D9F connector
Pin configuration Configuration parameters
Pin 2 = TxD (transmit data to the PC) Speed 9600 bauds
Pin 3 = RxD (receive commands) Parity No
Pin 5 = GnD Format 8 bits
Stop bit 1
Flow control No
Remarks
The Serial cable provided with DX Power Switch-Standalone is a standard straight
extension cable with DB9 connectors. This cable connects the Serial port of the DX
Power Switch-Standalone to a computer Serial port.