User guide

USER GUIDE
16
Command 1
IP SECURITY SETTINGS
Mask #1 0.0.0.0 Deny Not Activated
1. Edit the Mask
2. Permit / Deny
3. Activate / Deactivate
Enter Selection or <ESC> to exit
>
Command 1
IP SECURITY SETTINGS
Mask #1 is: 0.0.0.0
Enter mask or <ESC> to exit
>
Command 2
IP SECURITY SETTINGS
Mask #1 Access is: Deny
1. Permit
2. Deny
Enter Selection or <ESC> to exit
>
Command 3
IP SECURITY SETTINGS
Mask #1 Supervision is: Not Activated
1. Activate
2. Deactivate
Enter Selection or <ESC> to exit
>
Restarting the device
Command /RS
Restarts the DX Power Switch-Standalone. This function is used to:
· Show network parameters changes (command /NP).
· Leave the Serial configuration mode and return to the Command mode.