Technical data

CONTROLS Everything under control
66
6. Press the right-hand knob to save values.
7.
Press the button to leave settings.
Check Control
Principle
The Check Control monitors vehicle functions
and alerts you to any faults in the systems mon-
itored. Such a Check Control alert involves indi-
cator or warning lights in the displays and, if
applicable, an acoustic signal.
Indicator and warning lights can come on in var-
ious combinations and colours in panel 1 or 2.
What to do in the event of a fault
See the list starting on page 172 to determine
what each light means in the event of a malfunc-
tion and what measures should be taken.
Hiding Check Control messages
Press the button in the flashing turn indicator
lever.
> Some Check Control messages are displayed
until the faults have been rectified. These
messages cannot be hidden. If several faults
occur at the same time, the Check Control
messages are displayed in succession.
> Other Check Control messages are automat-
ically hidden after approx. 20 seconds, but
are not deleted.
Symbol indicates that Check Control mes-
sages are stored. Check Control messages can
be shown later on.
Displaying memorised Check Control
messages
Stored Check Control messages can only be
shown when the driver's door is closed.
1. Press the button in the turn indicator lever
repeatedly until "SET/INFO" appears.
2. Keep the button pressed until the display
changes.
Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AGOnline Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG