Technical data

Child safety CONTROLS
43
1 Direction of travel
2 Head restraint
3 Luggage area floor
4 Hook for the upper retaining strap
5 Mounting point
6 Seat back
7 Upper retaining strap of the child restraint
system
Clipping the upper retaining strap onto
the mounting point
1. Push the head restraint upwards.
2. Guide the upper retaining strap between the
head restraint posts.
3. Use the hook to clip the upper retaining
strap onto the mounting point.
4. Push the head restraint into its lowermost
position.
5. Pull the retaining strap taut.
For Australia/New
Zealand:
Child restraint systems
4-Seater
In accordance with ADR 34/01, provisions have
been made to allow installation of a child
restraint system at both outer seating positions
in the rear.
The attaching clip which is part of the upper
anchorage strap of a child restraint system –
AS 1754 – can be attached directly to corre-
sponding anchor fitting.
Please refer strictly to the installation instruc-
tions supplied with the child restraint system.
Child restraint anchor fittings
The child restraint anchor fittings, see arrows,
are located behind the back of the rear seats.
Routing the strap
Do not route the strap of the child restraint
system over the head rest or over sharp
edges and do not twist the strap, as otherwise
the protective effect of the child restraint system
is not given.<
1 Forward driving direction
2 Head rest
3 Load area floor
4 Attaching clip
5 Child restraint anchor fitting
6 Seat back
7 Strap of the child restraint system
Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AGOnline Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG