Technical data

Opening and closing CONTROLS
25
Automatic locking*
The situations in which the vehicle is locked can
also be programmed. The setting is stored for
the remote control in use.
1. Switch on the ignition, see page 46.
2. Press the button in the turn indicator lever
repeatedly until "SET/INFO" appears.
3. Keep the button pressed until the display
changes.
4. Press the button repeatedly until the symbol
and "SET" appear.
5. Keep the button pressed until the display
changes.
6. Press the button repeatedly until the indi-
cated symbol, arrow, appears.
7. Keep the button pressed until the display
changes.
8. Press button to select:
>
The central locking is engaged automati-
cally after a brief moment if no door has
been opened.
>
The central locking is engaged automati-
cally as soon as you drive off.
> or
The central locking is engaged automati-
cally after a brief moment if no door has
been opened or as soon as you drive off.
>
The central locking system remains
unlocked.
9. Keep the button pressed until the display
changes. The setting is stored.
Tailgate
In order to avoid damage, make sure
there is sufficient clearance in all direc-
tions before opening the tailgate.<
Opening
On certain national-market versions, the
tailgate can only be unlocked with the
remote control after the car has been unlocked.
Only drive with the tailgate completely closed,
as otherwise the rear lights are covered and
road safety is impaired.<
Press the top of the MINI badge, arrow, or
Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AGOnline Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG