Technical data

Opening and closing CONTROLS
23
3. Keep the button pressed until the display
changes.
4. Press the button repeatedly until the symbol
and "SET" appear.
5. Keep the button pressed until the display
changes.
6. Press button to select, arrow:
> Confirmation signal when the vehicle
is unlocked
> Confirmation signal when the vehicle
is locked
7. Keep the button pressed until the display
changes.
8. Press button to select:
>
The hazard warning flashers come on
while the vehicle is being unlocked/
locked.
>
The function is deactivated.
9. Keep the button pressed until the display
changes. The setting is stored.
Switching on the interior light
When the vehicle is locked:
Press the button.
This function also enables you to locate the car,
for instance in a parking garage.
Unlocking the tailgate
Press button approx. 1 second and then
release.
On certain national-market versions, the
tailgate cannot be unlocked unless the car
has been unlocked.
In order to avoid damage, make sure there is
sufficient clearance in all directions before open-
ing the tailgate.
If the tailgate had been locked before it was
opened, it is locked again as soon as it is closed.
Before and after each trip, check that the tail-
gate has not been inadvertently unlocked.<
Malfunctions
The remote control may malfunction as a result
of interference from localised radio signals. If
this occurs, unlock and lock the car at the door
lock with the integrated key.
If the vehicle can no longer be locked with a
remote control, the battery in the remote con-
trol is flat. Use this remote control when driving
a relatively long distance to recharge its battery,
page 20.
Via the door lock
Setting the way in which the vehicle is unlocked,
page 21.
Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AGOnline Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG