User Guide

40
CURRENT POSITION
Current position display
Before starting off, you would like to have a
look at the map to determine your current
position.
To call up the map:
Select "Map".
The current position of your vehicle is indi-
cated on the map.
To store this position:
1. Press the rotary button.
A selection menu appears on the screen
2. Select "Dest. Input Map".
A map showing current position and
destination appears along with a cursor
3. Select "Position".
The current position of your vehicle is
indicated on the map.
For map scales below 1 mile or 2 km, you
can store the position in the address book
using "Save Dest.", refer to page 38.
Entering the current position
A correction of the position is only recom-
mended in exceptional cases because the
GPS receiver only requires a few minutes to
find the position, for example, after the
vehicle is transported with a car-carrying
train.
To enter your current position:
1. Select "Information"
2. Select "Input Position"
3. Select city and street if desired.
Enter your current position with the
same procedure used to enter destina-
tions, refer to page 23
4. Select "Intersection?".
The information "Crossing intersection"
is output and the current position is cop-
ied from the GPS navigation system.
If the navigation system was able to
determine the position, this location
is stored in the system.<
Online Edition for Part No. 01 41 0 157 018 - © 01/03 BMW AG