User Guide

33
NAVIGATION OVERVIEWCOMPUTERINDEX
DISPLAYING ROUTE
Viewing the route map
Provided that you have selected the
undivided display mode (Full), you can dis-
play a map showing the planned route
while the system is guiding you to your
destination.
1. Press the rotary button.
A selection menu appears, also refer to
page 21
2. Select "Route map".
The route map appears on the screen.
To change to the direction display,
select .<
Revising scale
Regardless of which display mode you have
selected (Split/Full), you always have the
option of selecting the scale that best suits
your personal preferences.
1. Turn the rotary button to mark the field
with the specified scale
2. Turn the rotary button again to set the
desired map scale
3. Do not move the rotary button for a few
seconds or press it to save the map scale.
The map scale will change after a few
seconds.
Altering display direction
When you select a scale of less than 1 mile
or 2 km, you have the option of rotating the
map to orient it either to the north or to
your direction of travel.
1. Press the rotary button.
A selection menu appears, also refer to
page 21
2. Select "Map Positioning".
Another selection menu appears on the
screen
3. Select the desired directional orienta-
tion.
After changing the directional orien-
tation, it may take a few seconds
until the route map is shown.<
Online Edition for Part No. 01 41 0 157 018 - © 01/03 BMW AG