User Guide

26
MAP-SUPPORTED DESTINATION SELECTION
You know the town or city, but only the
general location of the street, and not its
name. In this case, you can select the desti-
nation on a map using a crosshair and
input it into the navigation system.
1. Enter the destination, refer to page 23
2. Select "Map"
3. Press the rotary button.
A selection menu appears on the screen
4. Select "Dest. Input Map"
5. To change the map scale if necessary:
> Turn the rotary button, continuing
until the map scale is highlighted
> Press the rotary button to select the
map scale
> Turn the rotary button again to set the
desired map scale
> Press the rotary button to store the
scale.
The "Save Dest." function can only
be selected for scales below 1 mile
or 2 km.
Moreover, several seconds may pass
before the map is displayed after the
scale has been changed.<
Localize the destination with the target
cursor:
> Turn the rotary button to mark the
desired change in direction with the cur-
sor
> Press and hold down the rotary button
until the map has been moved in the
desired direction below the target cursor
> Release the rotary button to fix the
change
> Select another cursor as necessary
> Press and hold down the rotary button to
move the map in the other direction
> Release to fix the change.
A few seconds may pass until the
new section of the map is dis-
played.<
Online Edition for Part No. 01 41 0 157 018 - © 01/03 BMW AG