Contents A-Z OWNER'S MANUAL. MINI. Online Edition for Part no.
MINI Owner's Manual for Vehicle Thank you for choosing a MINI. The more familiar you are with your vehicle, the better control you will have on the road. We therefore strongly suggest: Read this Owner's Manual before starting off in your new MINI. Also use the Integrated Owner's Manual in your vehicle. It con‐ tains important information on vehicle operation that will help you make full use of the technical features available in your MINI.
© 2014 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English II/14, 03 14 490 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling. Online Edition for Part no.
Contents The fastest way to find information on a partic‐ ular topic or item is by using the index, refer to page 220.
Notes Notes Using this Owner's Manual The fastest way to find information on a partic‐ ular topic is by using the index. An initial overview of the vehicle is provided in the first chapter. Updates made after the editorial deadline Any updates made after the editorial deadline for the Owner's Manuals are located in the ap‐ pendix of the printed quick reference for the vehicle.
Notes Updates made after the editorial deadline Any updates made after the editorial deadline can be found in the appendix of the printed Owner's Handbook for Vehicle. For your own safety Manufacturer The manufacturer of this MINI is Bayerische Motoren Werke Aktionengesellschaft, BMW AG. Warranty Your vehicle is technically configured for the operating conditions and registration require‐ ments applying in the country of first delivery homologation.
Notes engine oil contains chemicals that have caused cancer in laboratory animals. Always protect your skin by washing thoroughly with soap and water. Service and warranty We recommend that you read this publication thoroughly. Your vehicle is covered by the fol‐ lowing warranties: ▷ Warranty and Service Guide Booklet for Canadian models If the vehicle is not maintained according to these specifications, this could result in serious damage to the vehicle.
Notes When the vehicle is in use, situations are con‐ ceivable in which it might be possible to asso‐ ciate this technical data with individuals if it is combined with other information, e.g., an acci‐ dent report, damage to the vehicle, eye witness accounts — possibly with the assistance of an expert. Additional functions that are contractually agreed with the customer, such as vehicle lo‐ cating in an emergency, enable certain vehicle data to be transmitted from the vehicle.
Notes the toll-free hotline 1-800-333-0510. You can also obtain other information about motor ve‐ hicle safety from http://www.tc.gc.ca/roadsaf‐ ety. 10 Online Edition for Part no.
Notes Online Edition for Part no.
WATCH ME.
AT A GLANCE CONTROLS DRIVING TIPS MOBILITY REFERENCE Online Edition for Part no.
AT A GLANCE Cockpit Cockpit Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
AT A GLANCE Cockpit Store speed Cleaning windows 66 Resume speed 112, 117 Rear window wiper 66 Set speed 112, 116 Cleaning rear window 66 Reduce distance 116 9 Steering wheel buttons, right Voice activation 26 Increase distance 110 Telephone 6 Steering column stalk, left Turn signal 64 Confirm the selection 78 High beams, head‐ lamp flasher 64 Move selection up 78 Roadside parking lamps 86 Move selection down 78 Computer 79 Increase volume 7 Instrument cluster 71 8 Steering column sta
AT A GLANCE Cockpit All around the center console 1 2 Headliner 17 Hazard warning system 201 Start/stop the engine and switch the ignition on/off 62 Intelligent Safety 99 DSC Dynamic Stability Con‐ trol 106 Head-up Display 83 3 Control Display 18 4 Radio/Multimedia 5 Glove compartment 141 6 Climate control 127 7 8 Automatic transmission selector lever 67 Manual transmission selector lever 67 9 Controller with buttons 18 PDC Park Distance Control 118 10 Parking brake 63 Rearview camera
AT A GLANCE Cockpit All around the headliner 1 Intelligent Emergency Re‐ quest 201 4 Ambient light 90 2 Indicator lamp, front passenger airbag 93 5 Glass sunroof 45 3 Reading lamps 90 6 Interior lamps 89 Online Edition for Part no.
AT A GLANCE Onboard monitor Onboard monitor Vehicle equipment Control Display All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Hints ▷ To clean the Control Display, follow the care instructions.
AT A GLANCE Onboard monitor 1. Turn. Press the button Function BACK Displays the previous panel. OPTION Opens the Options menu. Controller without navigation system The buttons can be used to open the menus di‐ rectly. The controller can be used to select menu items and create the settings. 1. Turn. 2. Press. 2. Press. 3. Move in four directions. 3. Move in two directions. Buttons on controller Press the button Function MENU Open the main menu. RADIO Opens the Radio menu.
AT A GLANCE Onboard monitor Buttons on controller Selecting menu items Highlighted menu items can be selected. Press the button Function MENU Open the main menu. Audio Open audio menu last listened to, switch between audio me‐ nus. TEL Opens the Telephone menu. BACK Open previous panel. OPTION Opens the Options menu. Operating concept Opening the main menu Press the button. 1. Turn the controller until the desired menu item is highlighted. 2. Press the controller.
Onboard monitor Arrows pointing to the left or right indicate that additional panels can be opened. AT A GLANCE 2. Turn the controller until the desired setting is displayed. View of an opened menu When a menu is opened, it generally opens with the panel that was last selected in that menu. To display the first panel of a menu: ▷ Move the controller to the left repeatedly until the first panel is displayed. ▷ Press the menu button on the controller twice. Opening the Options menu Press the button.
AT A GLANCE Onboard monitor ▷ For the input of upper/lower case letters and numbers, it may be necessary to switch via the controller to the corresponding In‐ put mode, refer to page 25, e.g. when the spelling of upper and lower case letters is identical. ▷ Enter characters as they are displayed on the Control Display. ▷ Always enter accompanying signs, such as accents or periods so that the letter can be clearly recognized. The possibility of input depends on the set language.
AT A GLANCE Onboard monitor Status information Entertainment symbols Symbol Status field Meaning DVD changer. The following information is displayed in the status field at the top right: Music collection. ▷ Time. Gracenote® database. ▷ Current entertainment source. AUX-IN port. ▷ Sound output, on/off. ▷ Wireless network reception strength. USB audio interface. ▷ Telephone status. Mobile phone audio interface. ▷ Traffic bulletin reception.
AT A GLANCE Onboard monitor 4. Press the controller or select "Split screen content". The key assignment is displayed at the top edge of the screen. 5. Select the desired menu item. ▷ To display short information: touch the but‐ ton. Programmable memory buttons General information The onboard monitor functions can be stored on the programmable memory buttons and called up directly, e.g., radio stations, naviga‐ tion destinations, phone numbers and entry points into the menu.
Onboard monitor AT A GLANCE Switching between cases, letters and numbers Depending on the menu, you can switch be‐ tween entering upper and lower case, letters and numbers: Symbol Function Enter the letters. Enter the numbers. or Move the controller up. Without navigation system Select the symbol. Entry comparison Entry of names and addresses: the selection is narrowed down every time a letter is entered and letters may be added automatically.
AT A GLANCE Voice activation system Voice activation system Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Using voice activation Activating the voice activation system 1.
AT A GLANCE Voice activation system Via short command For example, if the "Settings" menu is dis‐ played, the commands for the settings are read out loud. The desired radio station can also be started via a short command. Executing functions using short commands 1. Switch on the Entertainment sound output if necessary. Functions on the main menu can be performed directly by means of short commands, nearly ir‐ respective of which menu item is currently se‐ lected, e.g., ›Vehicle status‹.
AT A GLANCE Voice activation system Adjusting the volume Turn the volume button while giving an instruc‐ tion until the desired volume is set. ▷ The volume remains constant even if the volume of other audio sources is changed. ▷ The volume is stored for the remote control currently in use. Hints on Emergency Re‐ quests Do not use the voice activation system to ini‐ tiate an Emergency Request. In stressful situa‐ tions, the voice and vocal pitch can change.
Integrated Owner's Manual in the vehicle AT A GLANCE Integrated Owner's Manual in the vehicle Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
AT A GLANCE Integrated Owner's Manual in the vehicle Leaf forward. Context help - Owner's Manual to the temporarily selected function The relevant information can be opened di‐ rectly. Opening via the onboard monitor To move directly from the application on the Control Display to the options menu: To switch back and forth repeatedly between the function displayed last and the page of the Owner's Manual displayed last, repeat steps 4 and 5. This opens a new panel every time.
Integrated Owner's Manual in the vehicle Online Edition for Part no.
HANDLE ME.
AT A GLANCE CONTROLS DRIVING TIPS MOBILITY REFERENCE Online Edition for Part no.
CONTROLS Opening and closing Opening and closing Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Opening and closing CONTROLS 3. Slide the key in the cover of the battery compartment and raise the cover, arrow. Starting the engine via emergency detection of the remote control 4. Insert a battery of the same type with the positive side facing upwards. Automatic transmission: if a corresponding Check Control message appears, hold the re‐ mote control, as shown, against the marked area on the steering column and press the Start/Stop button within 10 seconds while pressing the brake. 5.
CONTROLS Opening and closing Adjusting The following settings are stored in a profile. ▷ Radio: stored stations, station listened to last. ▷ Assignment of the programmable memory buttons. Called up profile is assigned to the remote con‐ trol being used at the time. Renaming profiles 1. "Settings" 2. "Profiles" The current profile is selected. ▷ Tone settings. ▷ Audio source listened to last. 3. Open "Options". ▷ Unlocking the vehicle: driver door or entire vehicle. 4.
Opening and closing Unlocking 3. "Export profile" 4. "USB device" Using the guest profile The guest profile can be used to make individ‐ ual settings that are saved in none of the three personal profiles. This can be useful for drivers who are using the vehicle temporarily and do not have their own profile. 1. CONTROLS "Settings" 2. "Profiles" Press the button on the remote con‐ trol. The vehicle is unlocked. Welcome lamps, interior lamp and courtesy lamps are switched on.
CONTROLS Opening and closing If the button is pressed within 10 seconds of when the vehicle was locked Interior motion sensor and tilt alarm sensor of the anti-theft warning system, refer to page 43, are switched off. After locking, wait 10 seconds be‐ fore pressing the button again. Panic mode You can trigger the alarm system if you find yourself in a dangerous situation. Press the button on the remote control for at least 3 seconds. To switch off the alarm: press any button.
Opening and closing CONTROLS Press the button. The doors and the tailgate are locked. The fuel filler flap is not locked. Press the button. The doors and the tailgate are un‐ locked. Unlock or lock the driver's door via the door lock using the integrated key. To do this, unlock the cap from below with the integrated key, arrow, and remove. The state of the driver's door, tailgate and fuel filler flap does not change.
CONTROLS Opening and closing mote control is locked inside the vehicle when the tailgate is closed.◀ Provide edge protection Sharp or angular objects can hit the rear window while driving and damage the heating wires of the rear window. Provide edge protec‐ tion.◀ ▷ Unlock the vehicle and press the button on the tailgate. ▷ Press the button on the remote control for approx. 1 second. Depending on the version and the country variant, it is possible to set whether the doors are also unlocked.
Opening and closing CONTROLS Unlocking Convenient closing On the driver's or front passenger's door han‐ dle, press the button, arrow. Press and hold down the handle of the driver or the front seat passenger. This corresponds to pressing the remote control button: This corresponds to pressing the remote control button: Locking In addition to locking, the windows and the glass sunroof are closed. Monitor the closing process Monitor the closing process to ensure that no one becomes trapped.
CONTROLS Opening and closing Locking Adjusting The settings are saved in the active profile. Per‐ sonal Profile, refer to page 35. Unlocking The settings are saved in the active profile. Per‐ sonal Profile, refer to page 35. 1. Doors 3. Select the desired setting. 1. Select the symbol. 4. Select the desired function. ▷ "Driver's door only" Only the driver's door and the fuel filler flap are unlocked. Pressing again un‐ locks the entire vehicle. ▷ "All doors" The entire vehicle is unlocked.
Opening and closing ▷ By switching on the hazard warning system. ▷ By flashing the daytime running lights. CONTROLS Indicator lamp on the interior rearview mirror Arming and disarming the alarm system When you lock or unlock the vehicle, either with the remote control or via the Comfort Ac‐ cess at the door lock, the alarm system is armed or disarmed at the same time. Door lock and armed alarm system The alarm system is triggered when the door is opened, if the vehicle is unlocked via the door lock.
CONTROLS Opening and closing ▷ In automatic car washes. ▷ In duplex garages. ▷ During transport on car-carrying trains, at sea or on a trailer. Opening ▷ The window opens while the switch is held. ▷ When animals are to remain in the vehicle. Switching off the tilt alarm sensor and interior motion sensor Press the remote control button again within 10 seconds as soon as the vehi‐ cle is locked. The indicator lamp lights up for approx. 2 sec‐ onds and then continues to flash.
CONTROLS Opening and closing No window accessories At a glance Do not install any accessories in the range of movement of the windows; otherwise, the pinch protection system will be impaired.◀ Closing without the pinch protection system Keep the closing path clear Monitor the closing process and make sure that the closing path of the window is clear; otherwise, injuries may result.
CONTROLS Opening and closing ▷ Press the switch back beyond the resist‐ ance point and release it. The glass roof is completely opened. Pressing the switch again stops the motion. Closing glass sunroof With the glass sunroof open: ▷ Slide switch forward to the resistance point and hold. The glass sunroof is closed as long as the switch is pressed and stops in the raised posi‐ tion. The glass sunroof opens again slightly.
Adjusting CONTROLS Adjusting Vehicle equipment Adjusting seats All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
CONTROLS Adjusting Height Thigh support Pull the lever up or press it down as often as needed to reach the desired height. Pull the lever at the front of the seat and adjust the thigh support. Backrest tilt Entering the rear Note Folding back and locking the backrest Before driving away, fold back and lock the backrests; otherwise, an unexpected seat movement may cause an accident.◀ Keep the movement area unobstructed Pull the lever and apply your weight to the backrest or lift it off, as necessary.
Adjusting Original position The driver's seat contains a mechanical mem‐ ory function for forward/aft and backrest ad‐ justment. 1. Push the seat back into the original posi‐ tion. 2. Fold back the backrest to lock the seat. If the backrest is folded back when the seat is not yet in the original position, the seat latches in the current position. In this case, manually adjust longitudinal direction, refer to page 47.
CONTROLS Adjusting otherwise, the belt can be damaged and the restraining effect reduced.◀ Front head restraints Correctly adjusted head restraint Buckling the belt A correctly adjusted head restraint reduces the risk of injury to cervical vertebrae in the event of an accident. Adjusting the head restraint Correctly adjust the head restraints of all occupied seats; otherwise, there is an increased risk of injury in an accident.◀ Height Make sure you hear the latch plate engage in the belt buckle.
Adjusting CONTROLS Adjusting the height 1. Pull the head restraint upward as far as possible. 2. Press the button, arrow 1, and pull the head restraint out completely. To remove the headrest, fold the backrest rear‐ ward if it is in the upright position. Before transporting passengers Reinstall the head restraint before trans‐ porting anyone in the seat; otherwise, the pro‐ tective function of the head restraint is unavail‐ able.◀ ▷ To raise: pull.
CONTROLS Adjusting Estimating distances correctly Objects reflected in the mirror are closer than they appear. Do not estimate the distance to the traffic behind you based on what you see in the mirror, as this will increase your risk of an accident.◀ 1. Pull the head restraint upward as far as possible. 2. Press the button, arrow 1, and pull the head restraint out completely. Depending on how the vehicle is equipped, the mirror setting is stored for the remote control in use.
Adjusting CONTROLS Interior rearview mirror, manually dimmable Fold in and out Press the button. Possible up to approx. 15 mph/20 km/h. Flip lever For example, this is advantageous ▷ In car washes. ▷ In narrow streets. ▷ For folding back mirrors that were folded away manually. Mirrors that were folded in are folded out auto‐ matically at a speed of approx. 25 mph/40 km/h.
CONTROLS Adjusting ▷ In the mirror glass. ▷ On the back of the mirror. Functional requirement For proper operation: ▷ Keep the photocells clean. ▷ Do not cover the area between the inside rearview mirror and the windshield. Steering wheel Note Do not adjust while driving Do not adjust the steering wheel while driving; otherwise, an unexpected movement could result in an accident.◀ Adjusting 1. Switch on the ignition. 2. Fold the lever down. 3.
Transporting children safely CONTROLS Transporting children safely Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
CONTROLS Transporting children safely jury because of unexpected movement of the rear seat backrest.◀ Child seat security On the front passenger seat Deactivating airbags After installing a child restraint fixing system in the front passenger seat, make sure that the front, knee and side airbags on the front pas‐ senger side are deactivated. Deactivate the front passenger airbags auto‐ matically, refer to page 93.
Transporting children safely Correctly engage the lower LATCH an‐ chors CONTROLS Mounting points Make sure that the lower LATCH anchors have properly engaged and that the child restraint fixing system is resting snugly against the back‐ rest; otherwise, the degree of protection of‐ fered may be reduced.◀ Before mounting the LATCH child restraint fix‐ ing system, pull the belt away from the child re‐ straint fixing system.
CONTROLS Transporting children safely Attaching the upper retaining strap to the mounting point 1. Raise the head restraint if necessary. 2. Guide the upper retaining strap between the supports of the head restraint. 3. Attach the hook of the retaining strap to the mounting eye on the rear seat. 4. Tighten the retaining strap by pulling it down. No persons on the back seat when there is a child restraint fixing system with an upper retaining strap on the front passenger seat.
Driving CONTROLS Driving Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Start/Stop button The concept Pressing the Start/Stop button switches the ignition on or off and starts the engine.
CONTROLS Driving Radio ready state Activate radio ready state: ▷ When the engine is running: press the Start/ Stop button. Some electronic systems/power consumers re‐ main ready for operation. Radio ready state switches off automatically: ▷ After approx. 8 minutes. ▷ When the vehicle is locked using the central locking system. ▷ Shortly before the battery is discharged completely, so that the engine can still be started.
CONTROLS Driving Set the parking brake and further secure the vehicle as required Set the parking brake firmly when parking; oth‐ erwise, the vehicle could roll. On steep upward and downward inclines, further secure the ve‐ hicle, for example, by turning the steering wheel in the direction of the curb. ◀ Before driving into a car wash In order for the vehicle to be able to roll into a car wash, pay attention to the information re‐ garding Washing in automatic car washes, refer to page 207. lights.
CONTROLS Driving The display indicates that the conditions for an automatic en‐ gine stop have not been satis‐ fied. Note The engine is not switched off automatically in the following situations: ▷ The external temperature is high and auto‐ matic climate control is running. ▷ The passenger compartment has not yet been heated or cooled to the required level. ▷ The engine is not yet at operating tempera‐ ture. ▷ The wheels are at a sharp angle or the steering wheel is being turned.
Driving Activating/deactivating the system manually Using the button CONTROLS Malfunction The Auto Start/Stop function no longer switches of the engine automatically. A Check Control message is displayed. It is possible to continue driving. Have the system checked. Parking brake Applying The lever automatically engages after being pulled up. The indicator lamp lights up red. The parking brake is set. Press the button.
CONTROLS Driving periodically while coasting, if traffic conditions permit. High beams, headlamp flasher The brake lamps will not light up if the parking brake is engaged. Turn signal, high beams, headlamp flasher Turn signal ▷ High beams, arrow 1. Using turn signals ▷ Headlamp flasher, arrow 2. Washer/wiper system Switching the wipers on/off and brief wipe Do not switch on the wipers if frozen Press the lever beyond the resistance point.
Driving The lever automatically returns to its initial po‐ sition when released. CONTROLS Activating/deactivating ▷ Normal wiping speed: press up once. The wipers switch to intermittent operation when the vehicle is stationary. ▷ Fast wiping speed: press up twice or press once beyond the resistance point. The wipers switch to normal speed when the vehicle is stationary. Switching off and brief wipe Press the button on the wiper lever.
CONTROLS Driving Washing the windshield gaged, the system switches to continuous op‐ eration. Cleaning rear window In interval mode: turn the switch further, ar‐ row 2. The switch automatically returns to its interval position when released. In idle position: turn switch downward, arrow 3. The switch automatically returns to its idle posi‐ tion when released. Pull the wiper lever. The system sprays washer fluid on the wind‐ shield and activates the wipers briefly.
Driving Therefore, keep it away from sources of igni‐ tion. CONTROLS Only keep it in the closed original container and inaccessible to children. Do not mix window washer concentrates of dif‐ ferent manufacturers, because otherwise it can result in clogging of the windshield washer noz‐ zles. Follow the notes and instructions on the con‐ tainer. Recommended minimum fill quantity: 0.2 US gal/1 liter. United States: The washer fluid mixture ratio is regulated by the U.S.
CONTROLS Driving P Park Sport program and manual mode M/S Select only when the vehicle is stationary. The drive wheels are blocked. Activating the sport program Before exiting the vehicle, make sure that se‐ lector lever position P of the automatic trans‐ mission is engaged. Otherwise, the vehicle may begin to roll. Kickdown Kickdown is used to achieve maximum driving performance. Press on the accelerator pedal beyond the resistance point at the full throttle position.
CONTROLS Driving The selected selector lever position is briefly displayed in the instrument cluster, followed by the current one. Manual mode M/S: prevent automatic upshifting Once maximum engine speed is attained, M/S manual mode is automatically upshifted as needed. For vehicles with Sport automatic transmission, automatic shift operations are not performed if one of the following conditions is met: ▷ Shift up: pull right shift paddle. ▷ Shift down: pull left shift paddle.
CONTROLS Driving Release the release lever. 5. Bring the selector lever into the desired po‐ sition. Sport automatic transmission: Launch Control The concept Launch Control enables optimum acceleration on surfaces with good traction. 3. With the left foot, forcefully press down on the brake. 4. Press on the accelerator pedal beyond the resistance point at the full throttle position. A flag symbol appears in the instrument cluster. 5. The starting engine speed adjusts.
Displays CONTROLS Displays Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
CONTROLS Displays Electronic displays 1 Driver assistance systems Messages, e.g. Check Control Computer 79 2 Time 75 Selector lever position display 67 Gear shift indicator 76 External temperature 75 Selection lists 78 3 Driving Dynamics Control 108 Status Miles/trip miles 74 Check Control Indicator/warning lamps The concept The indicator and warning lamps can light up in a variety of combinations and colors.
Displays Symbol Function or system Symbol Rear fog lamp CONTROLS Function or system In Canadian models Parking brake. Brake system. High beams ABS Antilock Brake System High-beam Assistant In Canadian models ABS Antilock Brake System Parking lamps, headlamp control At least one Check Control message is displayed or is stored (symbol in dis‐ play) Vehicle detection, Active Cruise Con‐ trol: collision warning.
CONTROLS Displays Hiding Check Control messages Fuel gauge The vehicle inclination may cause the display to vary. The arrow beside the fuel pump symbol shows which side of the vehicle the fuel filler flap is on. Hints on refueling, refer to page 164. Press the onboard computer button on the turn signal lever. ▷ Some Check Control messages are dis‐ played continuously and are not cleared until the malfunction is eliminated.
CONTROLS Displays ▷ When the ignition is switched on, the trip odometer is reset. Range Display After the reserve range is reached: External temperature If the indicator drops to +37 ℉/+3 ℃, a signal sounds. ▷ A Check Control message is displayed briefly. A Check Control message is dis‐ played. ▷ The remaining range is shown on the onboard com‐ puter. There is an increased risk of ice on roads. Ice on roads Even at temperatures above +37 ℉/+3 ℃, there can be a risk of ice on roads.
CONTROLS Displays Service requirements Ensure that the vehicle date and time are set correctly. The concept 1. The driving distance or the time to the next scheduled maintenance is displayed briefly in the instrument cluster after the ignition is switched on. 2. "Vehicle status" The current service requirements can be read out from the remote control by the service spe‐ cialist. 5.
Displays CONTROLS Speed limit detection with No Passing Informa‐ tion Hints The concept The system cannot serve as a substitute for the driver's personal judgment of the traffic situation. Speed limit detection Speed limit detection uses a symbol in the shape of a traffic sign to display the currently detected speed limit. The camera at the base of the interior rearview mirror detects traffic signs at the edge of the road as well as variable over‐ head sign posts.
CONTROLS Displays Speed limit detection The last speed limit detected. Without a navigation system the traffic signals are grayed out af‐ ter curves or longer stretches of roadway. With navigation system: speed limit detection is not available. ▷ In the event of incorrect detection by the camera. ▷ If the speed limits stored in the navigation system are incorrect. ▷ In areas not covered by the navigation sys‐ tem. ▷ When roads differ from the navigation, such as due to changes in the road network.
Displays Activating a list and adjusting the setting Button the steering wheel Function Activate the corre‐ sponding list, and se‐ lect the desired set‐ ting. Confirm the selection. CONTROLS ▷ Current fuel consumption. ▷ Average speed. ▷ Date. ▷ Engine temperature display. ▷ Distance to destination. When destination guidance is activated in the navigation system. ▷ Time of arrival. When destination guidance is activated in the navigation system. ▷ Speed limit detection. Computer ▷ Speed.
CONTROLS Displays Average speed Display on the Control Display Periods in which the vehicle is parked with the engine manually stopped are not included in the calculation of the average speed. Display the onboard computer or trip computer on the Control Display. Resetting average values Press and hold the onboard computer button on the turn signal lever. 1. "Vehicle Info" 2. "Onboard info" or "Trip computer" Resetting the fuel consumption and speed "Vehicle Info" Distance to destination 1.
Displays ▷ Engine temperature. 3. "Warning" ▷ External temperature. 4. Press the controller. ▷ SPORT program state. Finally, a total evaluation of the vehicle state is displayed. CONTROLS Setting your current speed as the limit "Settings" 1. 2. "Speed" Checking vehicle state 3. "Select current speed" Via onboard monitor: 4. Press the controller. 1. "Vehicle Info" The current vehicle speed is stored as the limit. 2. "Driving Excitement" 3.
CONTROLS Displays 3. "Format:" Setting the voice activation language 4. Select the desired format. The time format is stored. Input language for the voice activation system, refer to page 27. Date Units of measure Setting the date Setting the units of measure 1. To set the units for fuel consumption, route/ distance and temperature: "Settings" 2. "Time/Date" "Settings" 3. "Date:" 1. 4. Turn the controller until the desired day is displayed. 2. "Language/Units" 5. Press the controller. 4.
Displays CONTROLS Basic displays 3. "Basic display" or "Event display" Basic functions, for example the tachometer, can be set to be displayed continually if de‐ sired. 4. Select the desired setting. Setting the brightness The brightness can be adjusted when night lighting is active in the instrument cluster. Event displays Functions that are only displayed temporarily, for example the volume or temperature set‐ tings, can be set as event displays.
CONTROLS Displays or insert them in the system, or else the system can be damaged.◀ Follow the instructions for cleaning the Headup Display, refer to page 210. Some of this information is only displayed briefly as needed. Selecting displays in the Head-up Display "Settings" Display visibility 1. The visibility of the displays in the Head-up Dis‐ play is influenced by the following factors: 2. "Head-Up Display" ▷ Certain sitting positions. 4. Select the desired displays in the Head-up Display.
Displays CONTROLS 3. "Rotation" 4. Turn the controller. The setting is stored for the remote control cur‐ rently in use. Online Edition for Part no.
CONTROLS Lamps Lamps Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Lamps Welcome lamps and headlamp courtesy de‐ lay feature Welcome lamps When the vehicle is parked, leave the switch in or : parking and interior lamps position come on briefly when the vehicle is unlocked depending on the ambient light. Activating/deactivating 1. "Settings" CONTROLS The low beams always stay on when the fog lamps are switched on.
CONTROLS Lamps Cornering light is disrupted or failed. Have the system checked as soon as possible. Switching the high beams on and off manually High-beam Assistant The concept When the low beams are switched on, this sys‐ tem automatically switches the high beams on and off. The procedure is controlled by a sensor on the front of the interior rearview mirror. The assistant ensures that the high beams are switched on whenever the traffic situation al‐ lows.
CONTROLS Lamps ▷ When the windshield behind the interior rearview mirror is fogged over, dirty or cov‐ ered with stickers, etc. Right-hand/left-hand traffic Camera Halogen headlamps When crossing over into countries in which driving takes place on the other side of the road than in the country in which the vehicle is registered, measures must be taken to prevent the blinding effect of the headlamps. The serv‐ ice center can provide the necessary masking film.
CONTROLS Lamps Setting the brightness The brightness of the ambient light can be ad‐ justed via the thumbwheel for the instrument lighting or on the Control Display. 1. "Settings" 2. "Lighting" 3. "Brightness:" 1 Interior lamps 2 Reading lamp 3 Ambient light 4. Adjust the brightness. Switching the interior lamps on and off Press the button. To switch off permanently: press the button for approx. 3 seconds. Switch back on: press button. Reading lamps Press the button.
Safety CONTROLS Safety Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
CONTROLS Safety Protective action Airbags are not triggered in every impact situa‐ tion, e.g., in less severe accidents or rear-end collisions. Information on how to ensure the opti‐ mal protective effect of the airbags ▷ Keep at a distance from the airbags. ▷ Never modify either the individual compo‐ nents or the wiring in the airbag system. This also applies to steering wheel covers, the dashboard, the seats, the roof pillars and the sides of the headliner.
CONTROLS Safety When there is a malfunction, have the air‐ bag system checked immediately When there is a malfunction, have the airbag system checked immediately; otherwise, there is a risk that the system does not function as expected in the event of an accident despite corresponding severity of the accident.◀ Automatic deactivation of the front passenger airbags The system determines whether the front pas‐ senger seat is occupied by measuring the re‐ sistance of the human body.
CONTROLS Safety Detected child seats The system generally detects children seated in a child seat, especially in the child seats that were required by NHTSA when the vehicle was manufactured. After installing a child seat, make sure that the indicator lamp for the front passenger airbags lights up. This indicates that the child seat has been detected and the front passenger airbags are not activated.
Safety All wheels green System is active and will issue a warning rela‐ tive to the tire inflation pressures stored during the last reset. One wheel is yellow A flat tire or major drop in inflation pressure in the indicated tire. All wheels are yellow A flat tire or major drop in inflation pressure in several tires. Wheels, gray The system cannot detect a flat tire due to a malfunction. Status information The status display additionally shows the cur‐ rent tire inflation pressures.
CONTROLS Safety The tire pressure gauge of the Mobility Sys‐ tem, refer to page 175, can be used for this purpose. If the tire inflation pressure in all four tires is correct, the Tire Pressure Monitor may not have been initialized. In this case, initialize the system. If an identification is not possible, please contact the service center. 2. Fix the flat tire using the Mobility System, refer to page 175.
Safety System limits The system does not function properly if a reset has not been carried out, e.g., a flat tire is re‐ ported even though the tire inflation pressures are correct. The tire pressure depends on the temperature of the tire. If the tire temperature rises, e.g., due to driving or because of the heat of the Sun, the tire inflation pressure increases also. The tire pressure is reduced when the tire tem‐ perature falls again.
CONTROLS Safety It detects a pressure loss in a tire by comparing the rotational speeds of the individual wheels while moving. The initialization automatically continues when driving resumes. In the event of a pressure loss, the diameter and therefore the rotational speed of the corre‐ sponding wheel change. This is detected and reported as a flat tire.
Safety Actions in the event of a flat tire Normal tires 1. Identify the damaged tire. Do this by checking the air pressure in all four tires. The tire pressure gauge of the Mobility Sys‐ tem, refer to page 175, can be used for this purpose. If the tire inflation pressure in all four tires is correct, the Flat Tire Monitor may not have been initialized. In this case, initialize the system. If an identification is not possible, please contact the service center. 2.
CONTROLS Safety Note Personal responsibility The system does not serve as a substitute for the driver's personal judgment of the traffic situation. Be aware of the traffic situation and the vehi‐ cle's surroundings at all times, otherwise an ac‐ cident is still possible despite all warnings.◀ At a glance ▷ All Intelligent Safety systems are switched on. ▷ The LED lights up green. Hold the button down: ▷ All Intelligent Safety systems are switched off. ▷ The LED goes out.
Safety Detection range CONTROLS Keep the windshield in the area behind the in‐ terior rearview mirror clean and clear. Switching on/off Switching on automatically The system is automatically active every time the engine is started using the Start/Stop but‐ ton. Vehicles are observed when they are traveling in the same direction of movement if they are located within the detection range of the sys‐ tem.
CONTROLS Safety Warning with braking function Note Adapting your speed and driving style The warning does not relieve the driver of the responsibility to adapt his or her driving speed and style to the traffic conditions.◀ Display Measure The vehicle lights up red: prewarning. Due to system limitations, warnings may be not be issued at all, or may be issued late or improperly. Therefore, always be alert and ready to intervene; otherwise, there is the dan‐ ger of an accident occurring.
Safety ▷ During calibration of the camera immedi‐ ately after vehicle shipment. CONTROLS Detection range ▷ If there is constant dimming because of on‐ coming light, for example, from the sun low in the sky. Prewarning sensitivity Depending on the set prewarning time, this may result in increased false warnings. Pedestrian warning with city braking function The concept The system can help to prevent accidents with pedestrians. The detection area in front of the vehicle is div‐ ided into two areas.
CONTROLS Safety Camera Warning with braking function Note Adapting your speed and driving style The warning does not relieve the driver of the responsibility to adapt his or her driving speed and style to the traffic conditions.◀ Display The camera is located near the base of the mir‐ ror. Keep the windshield in the area behind the in‐ terior rearview mirror clean and clear. Switching on automatically The system is automatically active every time the engine is started using the Start/Stop but‐ ton.
Safety System limits CONTROLS Brake force display Be alert Due to system limitations, warnings may be not be issued at all, or may be issued late or improperly. Therefore, always be alert and ready to intervene; otherwise, there is the dan‐ ger of an accident occurring.◀ The concept Detection range The detection capability of the camera is lim‐ ited. This may result in the warning not being issued or being issued late.
CONTROLS Driving stability control systems Driving stability control systems Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Antilock Brake System ABS ABS prevents locking of the wheels during braking.
Driving stability control systems DSC OFF and the DSC OFF indicator lamp go out. Indicator/warning lamps When DSC is deactivated, DSC OFF is displayed in the instrument cluster. The indicator lamp lights up: DSC is de‐ activated. CONTROLS Deactivating/activating DTC Dynamic Traction Control Activating the Dynamic Traction Control DTC provides maximum traction on loose ground. TRACTION is activated. Driving stability is lim‐ ited during acceleration and when driving in bends.
CONTROLS Driving stability control systems Programs Activating GREEN The system offers several different programs. Turn Driving Dynamics Control to the right until GREEN is displayed in the instrument cluster. The programs can be selected via the Driving Dynamics Control, refer to page 108. MID/GREEN Configuring GREEN Via the Driving Dynamics Control Balanced control of the vehicle. 1. Activate GREEN. SPORT 2.
Driving stability control systems Configure the program. SPORT can also be configured before it is acti‐ vated: 1. "Settings" CONTROLS Drive-off assistant This system supports driving away on gradients. The parking brake is not required. 1. Hold the vehicle in place with the foot brake. 2. "Driving mode" 3. "Configure SPORT" This configuration is retrieved when SPORT is activated.
CONTROLS Driving comfort Driving comfort Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Driving comfort CONTROLS Display in the instrument cluster lights up. Press the but‐ Function ton Reduce distance, refer to page 112 Increase distance, refer to page 112 Display in the instrument cluster lights up. The current speed is adopted as the desired speed and displayed on the symbol. Maintain or save speed, refer to page 112 Cruise control can be used.
CONTROLS Driving comfort Maintaining/storing the speed Press the button. ▷ Or: or increases or decreases by approx. 1 mph/ km/ Press button in the interrupted state. When the system is switched on, the current speed is maintained and stored as the desired speed. The speed is displayed on the symbol. When cruise control is maintained or stored, DSC Dynamic Stability Control is switched on, if necessary.
Driving comfort In the following cases, the stored speed value is deleted and cannot be called up again: ▷ When the system is switched off. ▷ When the ignition is switched off. Changing between cruise control with/ without distance control Traffic driving ahead The cruise control does not react to traffic driving ahead of you, but instead maintains the stored speed. Take this factor into account – you yourself must react; otherwise, there is the danger of an accident occurring.
CONTROLS Driving comfort The vehicle symbol flashes red and an acoustic signal sounds: Detection range You are requested to intervene by brak‐ ing or making an evasive maneuver. The system has been interrupted or dis‐ tance control is deactivated because the accelerator pedal is being pressed; a vehicle was not detected. Distance control is deactivated because the accelerator pedal is being pressed; a vehicle was detected.
Driving comfort Swerving vehicles CONTROLS In tight curves, situations may result due to the restricted detection range of the system in which a vehicle driving ahead of you may not be detected at all, or not until after a considera‐ ble delay. A vehicle driving in front of you is not detected until it is completely within the same lane as your vehicle.
CONTROLS Driving comfort Cruise control Switching on Press the button on the steering wheel. The concept The system is functional at speeds beginning at approx. 20 mph/30 km/h. It maintains the speed that was set using the control elements on the steering wheel. The system brakes on downhill gradients if en‐ gine braking action is insufficient. Unfavorable conditions Do not use the system if unfavorable con‐ ditions make it impossible to drive at a constant speed, for instance: ▷ On curvy roads.
Driving comfort Maintaining/storing the current speed Press the button. Or or button: press while the system is in‐ terrupted. When the system is switched on, the current speed is maintained and stored as the desired speed. This is displayed in the instrument cluster. When cruise control is maintained or stored, DSC Dynamic Stability Control is switched on, if necessary. Changing/maintaining speed or button: can be pressed while the sys‐ tem is interrupted in order to maintain and store the current speed.
CONTROLS Driving comfort PDC Park Distance Con‐ trol At a glance Button in the vehicle The concept PDC supports you when parking. Slowly ap‐ proaching an object behind or, with the appro‐ priate equipment, also in front of your vehicle is signaled by: ▷ Signal tones. ▷ Visual display. General information Measurements are made by ultrasound sensors in the bumpers. The range, depending on obstacles and envi‐ ronmental conditions, is approx. 6 ft/2 m.
Driving comfort Switching on/off manually Press the button. ▷ On: the LED lights up. ▷ Off: the LED goes out. CONTROLS The range of the sensors is represented in col‐ ors: red, green and yellow. When the image of the rearview camera is dis‐ played, the switch can be made to PDC: "Rear view camera" Display System limits Signal tones Limits of ultrasonic measurement When approaching an object, an intermittent tone is sounded that indicates the position of the object.
CONTROLS Driving comfort Hints ▷ In heavy rain. ▷ When sensors are very dirty or covered in ice. ▷ When sensors are covered in snow. ▷ On rough road surfaces. ▷ On uneven surfaces, such as speed bumps. ▷ In large buildings with right angles and smooth walls, e.g., in underground garages. ▷ In heavy exhaust. ▷ Due to other ultrasound sources, e.g., sweeping machines, high pressure steam cleaners or neon lights.
Driving comfort Switching on/off CONTROLS ▷ Obstacle marking Switching on automatically With the engine running, engage selector lever position R. "Obstacle marking" Spatially-shaped markings are displayed. Pathway lines The rearview camera image is displayed if the system was switched on via the onboard moni‐ tor. Automatic deactivation during forward travel The system switches off when a certain driving distance or speed is exceeded. Switch the system back on if necessary.
CONTROLS Driving comfort Display settings Obstacle marking Brightness With the rearview camera switched on: 1. Select the symbol. 2. Turn the controller until the desired setting is reached and press the controller. Contrast ▷ Marks for detected obstacles can be shown in the rearview camera image. Their colored steps match the markings of the PDC. This simplifies estimation of the distance to the object shown. With the rearview camera switched on: 1. Select the symbol. 2.
Driving comfort This system assists the driver in parking parallel to the road. Ultrasound sensors measure parking spaces on both sides of the vehicle. The parking assistant calculates the best possi‐ ble parking line and takes control of steering during the parking procedure. When parking, also take note of the visual and acoustic information issued by the PDC, the parking assistant and, where applicable, the rearview camera, and react accordingly.
CONTROLS Driving comfort At a glance Parking assistant is activated automatically. Switching on with reverse gear Button in the vehicle Shift into reverse. The current status of the parking space search is indicated on the Control Display. To activate: "Parking Assistant" Switching off The system can be deactivated as follows: ▷ Parking assistant Press the button. ▷ Switch off the ignition.
Driving comfort parking assistant is active, suitable parking spaces are highlighted. ▷ The parking procedure is ac‐ tive. Steering control has been seized. ▷ Parking space search is always active whenever the vehicle is moving forwards slow and straight, even if the system is de‐ activated. When the system is deactivated, the displays on the Control Display are shown in gray.
CONTROLS Driving comfort Limits of ultrasonic measurement The detection of objects can reach the physical limits of ultrasonic measurement, e.g., in the following circumstances: ▷ For small children and animals. ▷ For persons with certain clothing, e.g. coats. ▷ If there is an external disturbance of the ul‐ trasound, e.g. from passing vehicles or loud machines. ▷ When sensors are dirty, iced over, damaged or out of position.
Climate control CONTROLS Climate control Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
CONTROLS Climate control Climate control functions in detail Manual air distribution Turn the wheel to select the de‐ sired program or the desired in‐ termediate setting. The air is cooled and dehumidified and, de‐ pending on the temperature setting, warmed again. Depending on the weather, the windshield may fog up briefly when the engine is started. When using the air conditioner, condensation water, refer to page 150, develops that exits underneath the vehicle. ▷ Windows. ▷ Upper body region.
Climate control Windshield defroster Press the button. The front window defroster switches off automatically after a certain period of time. Switching the system on/off Switching off Turn wheel for air quantity to the left until the control switches off. CONTROLS Switching on Set any air volume. Microfilter In external and recirculated air mode the mi‐ crofilter filters dust and pollen out of the air. This filter should be replaced during scheduled maintenance, refer to page 186, of your vehi‐ cle.
CONTROLS Climate control 13 Windshield defroster 15 Seat heating, left 49 14 Defrosting windows and removing conden‐ sation Climate control functions in detail rected to the windshield, side windows, upper body, and into the footwell. Temperature The cooling function, refer to page 131, and the automatic recirculation control, refer to page 131, are automatically also switched on in the AUTO program. Turn the wheel to set the desired temperature.
Climate control The system is set to the lowest temperature, maximum air flow and recirculated-air mode. Air flows out of the vents for the upper body re‐ gion. The vents need to be open for this. The function is available above external tem‐ perature of approx. 32 ℉/0 ℃ and with the en‐ gine running. The air flow can be adjusted when the program is active. Cooling function The passenger compartment can only be cooled with the engine running. Press the button.
CONTROLS Climate control Switching the system on/off Switching off Turn wheel for air quantity to the left until the control switches off. Adjust the vent to let the air flow past you. Parked-car ventilation The concept The parked-car ventilation ventilates the vehi‐ cle interior and lowers its temperature, if nec‐ essary. Switching on Set any air volume.
Interior equipment CONTROLS Interior equipment Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
CONTROLS Interior equipment 3. Hold the hand-held transmitter for the sys‐ tem to be controlled approx. 1 to 3 in/2.5 to 8 cm away from the buttons on the inte‐ rior rearview mirror. The required distance depends on the manual transmitter. 4. Simultaneously press and hold the button of the desired function on the hand-held transmitter and the button to be program‐ med on the interior rearview mirror. The LED on the interior rearview mirror will be‐ gin flashing slowly. 5.
Interior equipment 4. Likewise, press and hold the button of the desired function on the hand-held trans‐ mitter. 5. Release both buttons as soon as the interior rearview mirror LED flashes more rapidly. When the LED is flashing faster, this indi‐ cates that the button on the interior rear‐ view mirror has been programmed. The system can then be controlled by the but‐ ton on the interior rearview mirror. CONTROLS rapidly. All stored functions are deleted. The functions cannot be deleted individually.
CONTROLS Interior equipment World map with magnetic zones Procedure Procedure 1. Press and hold the control button for ap‐ prox. 3 to 4 seconds. The number of the set compass zone appears in the mirror. 1. Make sure that there are no large metallic objects or overhead power lines near the vehicle and that there is sufficient room to drive around in a circle. 2.
Interior equipment The setting is stored automatically after ap‐ proximately 10 seconds. CONTROLS In the center console Connecting electrical de‐ vices Hints Do not connect charging devices to the 12 volt socket in the vehicle Do not connect battery chargers to the factoryinstalled 12 volt sockets in the vehicle as this may damage the vehicle battery due to an in‐ creased power consumption.◀ Remove the cover or cigarette lighter.
CONTROLS Interior equipment At a glance Ashtray In order to empty the ashtray, remove the ash‐ tray from the cupholder. Lighter Danger of burns Only hold the hot lighter by its knob; oth‐ erwise, there is the danger of getting burned. The USB interface is located in the front of the center console. Switch off the ignition and take the remote control with you when leaving the vehicle so that children cannot use the lighter and burn themselves.
Interior equipment 2. Pull the cargo cover out of the brackets on the left and right. CONTROLS Folding down rear seat backrest The rear seat backrests can be folded down from the front or from the cargo area. Before the backrest is folded down, hook the corresponding safety belt into the safety belt on the side. Installing cargo cover 1. Slide the cover forward horizontally into the two side brackets until it audibly latches. 2. Attach the left and right retaining straps at the tailgate.
CONTROLS Interior equipment 2. Fold the frame, arrow, up until it latches. 3. Fold back and latch the backrest. Do not install any child restraint systems When the backrests are set at steeper po‐ sition, did not install any child restraint systems on the backrest; otherwise, their protective ef‐ fect may be impaired.◀ 140 Online Edition for Part no.
Storage compartments CONTROLS Storage compartments Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Do not place anti-slip mats on the dash‐ board Do not place anti-slip mats on the dashboard.
CONTROLS Storage compartments Storage compartment above the glove com‐ partment Opening Opening Press the button, arrow 1, and open center arm rest upward, arrow 2. Press the lower edge of the cover. Immediately close the storage compart‐ ment Close the storage compartment immediately after use while driving; otherwise, injury may occur during accidents.◀ Closing Push the cover back into the original position.
Storage compartments Rear CONTROLS Storage space under the cargo floor panel In front of the back seats and in the side armr‐ ests. Clothes hooks The clothes hooks are located above the side windows in the rear. Do not obstruct view When suspending clothing from the hooks, ensure that it will not obstruct the driv‐ er's vision.◀ No heavy objects Do not hang heavy objects from the hooks; otherwise, they may present a danger to passengers during braking and evasive ma‐ neuvers.
CONTROLS Storage compartments Folded up position The variable cargo area may not be used as a partition net to separate the cargo area and the passenger compartment. Maximum load in this position: 330 lbs/150 kg. ▷ Space for objects remains between the fixed and variable cargo area floor. ▷ Only use the variable cargo floor in the folded-up position when the backrests are folded up and locked. ▷ Always secure cargo against shifting, using straps, belts and lashing eyes, for example.
Storage compartments Online Edition for Part no.
DRIVE ME. Online Edition for Part no.
AT A GLANCE CONTROLS DRIVING TIPS MOBILITY REFERENCE Online Edition for Part no.
DRIVING TIPS Things to remember when driving Things to remember when driving Vehicle equipment tion potential until after an initial breaking-in period. All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Things to remember when driving ▷ Drive moderately. DRIVING TIPS during transmission will be discharged from the vehicle interior.◀ Hot exhaust system Hot exhaust system Hydroplaning High temperatures are generated in the exhaust system. On wet or slushy roads, a wedge of water can form between the tires and road surface. Do not remove the heat shields installed and never apply undercoating to them. Make sure that flammable materials, e. g. hay, leaves, grass, etc.
DRIVING TIPS Things to remember when driving Objects in the area around the pedals No objects in the area around the pedals Do not drive in neutral Do not drive in neutral or with the engine stopped, as doing so disables engine braking. In addition, steering and brake assist are un‐ available with the engine stopped.
Loading DRIVING TIPS Loading Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
DRIVING TIPS Loading Load Securing cargo Lashing eyes in the cargo area The maximum load is the sum of the weight of the occupants and the cargo. The greater the weight of the occupants, the less cargo that can be transported. Without storage compartment package: to se‐ cure the cargo there are two lashing eyes, ar‐ row 1, in the cargo area. Stowing cargo With storage compartment package: to secure the cargo there are six lashing eyes, arrows 1 and 2, in the cargo area.
Loading Securing Securing Follow the installation instructions of the roof rack. COOPER/COOPER D DRIVING TIPS Loading Be sure that adequate clearance is maintained for tilting and opening the glass sunroof. Because roof racks raise the vehicle's center of gravity when loaded, they have a major effect on vehicle handling and steering response. Therefore, note the following when loading and driving: ▷ Do not exceed the approved roof/axle loads and the approved gross vehicle weight.
DRIVING TIPS Loading Function of tail lamps Before starting to drive, check that the tail lamps of the rear luggage rack are function‐ ing properly; otherwise, there is a risk of en‐ dangering other road users.◀ 154 Online Edition for Part no.
Saving fuel DRIVING TIPS Saving fuel Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. General information Fuel consumption depends on a number of dif‐ ferent factors.
DRIVING TIPS Saving fuel Avoid high engine speeds Use 1st gear to get the vehicle in motion. Be‐ ginning with 2nd gear, accelerate rapidly. When accelerating, shift up before reaching high en‐ gine speeds. In addition, fuel consumption is also deter‐ mined by other factors, such as driving style, road conditions, maintenance or environmental factors. When you reach the desired speed, shift into the highest applicable gear and drive with the engine speed as low as possible and at a con‐ stant speed.
Saving fuel consumption. Selector lever position D remains engaged. An indicator provides information about the distance traveled in Coasting mode. 3. "Configure GREEN" In addition, context-sensitive instructions can be displayed that assist in driving in a manner that optimizes fuel consumption. GREEN tip The extension of the range that is achieved as a result can be displayed in the instrument clus‐ ter.
DRIVING TIPS Saving fuel Display in the instrument cluster GREEN tip driving instruction GREEN bonus range An extension of the range can be achieved by an adjusted driving style. This may be displayed as the bo‐ nus range in the instrument clus‐ ter. The bonus range is shown in the range display. The bonus range is automatically reset every time the vehicle is refueled.
Saving fuel Symbol Measure Manual shift transmission: follow shifting instructions. Manual shift transmission: engage neutral for engine stop. Indications on the Control Display MINIMALISM Information on fuel consumption and technol‐ ogy can be displayed during driving. 1. "Vehicle Info" DRIVING TIPS idling to reduce fuel consumption. Selector lever position D remains engaged. This driving condition is referred to as coasting.
DRIVING TIPS Saving fuel Display MINIMALISM driving style analysis Display in the instrument cluster The concept The mark in the bar display be‐ low the tachometer is high‐ lighted green and appears at the zero point. The tachometer ap‐ proximately indicates idle speed. Indications on the Control Display The Coasting driving condition is displayed in MINIMALISM Info while this driving mode is ac‐ tive. The distance traveled in the Coasting driving condition is indicated by a counter.
Saving fuel DRIVING TIPS egories. The bonus range achieved by driving style that minimizes fuel consumption is dis‐ played below the table of values. The fish and the movements of the water in the glass symbolize the efficiency of the driving style. The more efficient the driving style, the less the water sloshes around in the glass and the better is the fish's mood, refer to arrow 1. The table of values includes asterisks, refer to arrow 2.
MOVE ME. Online Edition for Part no.
AT A GLANCE CONTROLS DRIVING TIPS MOBILITY REFERENCE Online Edition for Part no.
MOBILITY Refueling Refueling Vehicle equipment 2. Turn the fuel cap counterclockwise. All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. General information Refuel promptly 3.
Refueling MOBILITY Remove the cover. Pull the green knob with the fuel pump symbol. This releases the fuel filler flap. Observe the following when refueling The fuel tank is full when the filler nozzle clicks off the first time. Do not overfill the fuel tank Do not overfill the fuel tank; otherwise fuel may escape, causing harm to the environ‐ ment and damaging the vehicle.◀ Handling fuels Obey safety regulations posted at the gas station.◀ Online Edition for Part no.
MOBILITY Fuel Fuel Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Fuel recommendation CAN: CGSB-3.511–xx xx: comply with the current standard in each case.
Fuel MOBILITY Failure to comply with these recommendations may result in the need for unscheduled mainte‐ nance.◀ Online Edition for Part no.
MOBILITY Wheels and tires Wheels and tires Vehicle equipment The displays of inflation devices may underread by up to 0.1bar, 2psi. All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Wheels and tires Tire inflation pressures up to 100 mph/ 160 km/h For speeds of up to 100 mph/160 km/h and for optimum driving comfort, note the pressure values in the tire inflation pressure table, refer to page 169, and adjust as necessary. MOBILITY Tire inflation pressure values up to 100 mph/160 km/h COOPER Tire size Pressure specifications in bar/PSI Specifications in bar/PSI with cold tires 175/65 R 15 84 H Std 2.4 / 35 2.
MOBILITY Wheels and tires COOPER S Tire size Pressure specifications in bar/PSI Specifications in bar/PSI with cold tires 195/55 R 16 87 W RSC COOPER Tire size 2.4 / 35 2.4 / 35 195/55 R 16 87 V M +S A/S RSC 2.6 / 38 2.4 / 35 205/45 R 17 88 W XL RSC Pressure specifications in bar/PSI Specifications in bar/PSI with cold tires 175/65 R 15 84 H Std 195/55 R 16 87 H M +S RSC 205/45 R 17 88 V M +S XL A/S RSC Tire inflation pressure values over 100 mph/160 km/h 2.
Wheels and tires COOPER S Tire size MOBILITY V = up to 150 mph, 240 km/h Pressure specifications in bar/PSI Specifications in bar/PSI with cold tires W = up to 167 mph, 270 km/h Y = up to 186 mph, 300 km/h Tire Identification Number DOT code: DOT xxxx xxx 0814 xxxx: manufacturer code for the tire brand 195/55 R 16 87 W RSC 2.8 / 41 2.6 / 38 xxx: tire size and tire design 0814: tire age 195/55 R 16 87 V M +S A/S RSC Tires with DOT codes meet the guidelines of the U.S.
MOBILITY Wheels and tires 100. The relative performance of tires depends upon the actual conditions of their use, how‐ ever, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate. Traction The traction grades, from highest to lowest, are AA, A, B, and C.
Wheels and tires Tire damage General information MOBILITY Changing wheels and tires Inspect your tires often for damage, foreign ob‐ jects lodged in the tread, and tread wear. Mounting Hints Have mounting and balancing performed only by a service center. Driving over rough or damaged road surfaces, as well as debris, curbs and other obstacles can cause serious damage to wheels, tires and sus‐ pension parts.
MOBILITY Wheels and tires Recommended tire brands Maximum speed of winter tires If the maximum speed of the vehicle is higher than the permissible speed for the winter tires, then display a corresponding sign in the field of vision. You can obtain this sign from the tire specialist or from your service center. Maximum speed for winter tires For each tire size, the manufacturer of your ve‐ hicle recommends certain tire brands. These can be identified by a star on the tire sidewall.
Wheels and tires Run-flat tires Label MOBILITY Have all vehicle occupants get out of the vehi‐ cle and ensure that they remain outside the im‐ mediate area in a safe place, such as behind a guardrail. If necessary, set up a warning triangle at an ap‐ propriate distance. Comply with all safety guidelines and regula‐ tions.◀ Mobility System RSC label on the tire sidewall. The concept The wheels are composed of tires that are selfsupporting to a limited degree.
MOBILITY Wheels and tires Filling the tire with sealant Sealant bottle 1. Shake the sealant bottle. ▷ Sealant bottle, arrow 1. ▷ Filling hose, arrow 2. Note the use-by date on the sealant bottle. 2. Take the connection hose completely out of the compressor housing. Do not kink the hose. Compressor 3. Attach the connection hose to the connec‐ tor of the sealing bottle, ensuring that it en‐ gages audibly.
Wheels and tires 4. Slide the sealing bottle upright into the holder on the compressor housing, ensur‐ ing that it engages audibly. 5. Screw the connection hose onto the valve of the defective wheel. MOBILITY 7. With the ignition turned on or the engine running, switch on the compressor. Let the compressor run for approx. 3 to 8 mi‐ nutes to fill the tire with sealant and achieve a tire inflation pressure of approx. 2.5 bar.
MOBILITY Wheels and tires Stowing the Mobility System 1. Disconnect the connection hose of the seal‐ ant bottle from the wheel. 4. Insert the connector into a power socket in‐ side the vehicle. 2. Disconnect the connection hose from the sealant bottle. 3. Wrap the empty sealant bottle and connec‐ tion hose in suitable material to avoid dirty‐ ing the cargo area. 4. Stow the Mobility System back in the vehi‐ cle.
Wheels and tires MOBILITY ▷ 175/60 R 16. Follow the chain manufacturer's instructions. Make sure that the snow chains are always suf‐ ficiently tight. Retighten as needed according to the chain manufacturer's instructions. Do not initialize the Flat Tire Monitor after mounting snow chains, as doing so may result in incorrect readings. Do not initialize the Tire Pressure Monitor after mounting snow chains, as doing so may result in incorrect readings.
MOBILITY Engine compartment Engine compartment Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Engine compartment Never reach into the engine compart‐ ment MOBILITY Closing the hood Never reach into the intermediate spaces or gaps in the engine compartment. Otherwise, there is risk of injury, e.g., from rotating or hot parts.◀ Fold down wiper arm Before opening the hood, ensure that the wiper arms are against the windshield, or this may result in damage.◀ Opening the hood 1. Pull lever in the interior, arrow. Let the hood drop from a height of approx.
MOBILITY Engine oil Engine oil Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Requirements A current measured value is available after ap‐ prox. 30 minutes of driving.
Engine oil During the measurement, the idle speed is in‐ creased somewhat. MOBILITY Filler neck Requirements ▷ Vehicle is on level road. ▷ Manual transmission: shift lever in neutral position, clutch and accelerator pedals not depressed. ▷ Automatic transmission: selector lever in transmission position N or P and accelera‐ tor pedal not depressed. ▷ Engine is running and is at operating tem‐ perature.
MOBILITY Engine oil SAE 5W-30 or malfunctions or engine damage may occur.◀ The engine oil quality is critical for the life of the engine. Approved oil types You can add oils with the following specifica‐ tions: Gasoline engine BMW Longlife-01 BMW Longlife-01 FE Additional information about the approved types of oils can be requested from the service center.
Coolant MOBILITY Coolant Vehicle equipment 2. Turn the coolant reservoir lid counterclock‐ wise to unscrew and open it. All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
MOBILITY Maintenance Maintenance Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
Maintenance MOBILITY specifications of the vehicle manufacturer with correspondingly trained personnel and other authorized persons. Otherwise, use may result in operating problems for the vehicle.◀ Position There is an OBD socket on the driver's side for checking the primary components in the vehi‐ cle emissions. Emissions ▷ The warning lamp lights up: Emissions are deteriorating. Have the vehicle checked as soon as pos‐ sible. Canadian model: warning light indi‐ cates the engine symbol.
MOBILITY Replacing components Replacing components Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Replacing the wiper blades 1. Fold up and hold the wiper arm firmly. 2. Open the wiper blade lock, arrow.
Replacing components Replace the rear wiper blade 1. Fold up and hold the wiper arm firmly. 2. Turn the wiper blade all the way back. MOBILITY To avoid possible injury or equipment damage when replacing bulbs, observe any instructions provided by the bulb manufacturer.◀ Do not touch the bulbs Do not touch the glass of new bulbs with your bare hands, as even minute amounts of contamination will burn into the bulb's surface and reduce its service life.
MOBILITY Replacing components Front lamps, bulb replacement Bug light At a glance Halogen headlamps 1 Low beams/high beams 2 Turn signal 1 Parking lamps 2 Daytime running lights 3 Fog lamps LED bug light LED headlamps 1 Parking lamps 2 Fog lamps 1 Daytime running lights 2 Low beams/high beams Low beams/high beams 3 Turn signal Follow the general instructions on Lamps and bulbs, refer to page 189. 190 Online Edition for Part no.
Replacing components MOBILITY Bulbs: H4 With white turn signal lamps: PWY24W 1. Open the hood, refer to page 181. 1. Turn the steering wheel. 2. Turn the lid counterclockwise, arrow 1, and remove. 2. Turn the lid counterclockwise, arrow 1, and remove. 3. Pull off the connector. 3. Unscrew the inner cap counterclockwise, and remove it. 4. Unclip spring clip, arrow 1, and fold down. 5. Remove the bulb from the headlamp hous‐ ing. 6. Insert the new bulb and install the cover in the reverse order. 4.
MOBILITY Replacing components Parking lamps/fog lamps/daytime running lights ▷ Turn the bulb socket of the fog lamp counterclockwise, arrow 3, and re‐ move. Follow the general instructions on Lamps and bulbs, refer to page 189. Bulbs: ▷ Parking lamps for halogen headlamps: W5W Parking lamps for LED headlamps: W5W NBV ▷ Daytime running light: PSX24W ▷ Fog lamp: H8 1. Turn the steering wheel. 2. Turn the lid counterclockwise, arrow 2, and remove. 5.
Replacing components Vehicle with two rear fog lamps Side LED tail lamps 1 Side tail lamps 1 Brake lights/tail lights 2 Rear fog lamps 2 Turn signal 3 License plate lamp 3 Reversing lights 4 High brake lights MOBILITY Side tail lamps Follow the general instructions on lamps and bulbs, refer to page 189. Side tail lamps Bulbs: P21W 1. Open the tailgate., refer to page 39 2. Remove left or right cover. 1 Brake lights/tail lights 2 Turn signal 3 Reversing lights 3.
MOBILITY Replacing components Push apart the latches, arrows 1, and re‐ move the bulb holder. Bulbs: W16W 1. On vehicles with heat shield: Loosen 3 screws, arrow. 4. Remove the bulb holder from the opening. 5. Press the defective bulb gently into the socket, turn clockwise and remove. ▷ Arrow 1: brake lights/tail lights ▷ Arrow 2: turn signal ▷ Arrow 3: reversing light 2. Push the heat shield forward and the bumper back in order to be able to reach the fog lamp. 3.
Replacing components Loosen 3 screws, arrow. MOBILITY The wire is long enough to guide the socket down and through between any heat shield that may be installed and the bumper. 2. Push the heat shield forward and the bumper back in order to be able to reach the fog lamp. 2. Replace defective bulb. 3. Turn the bulb socket counterclockwise and remove. 3. To install the new bulb, proceed in reverse order of removal.
MOBILITY Replacing components ▷ With white lens: WY5W diadem Jacking points for the vehicle jack 1. Push turn signal housing up and pull out at the bottom. The jacking points for the vehicle jack are lo‐ cated at the positions shown. 2. Turn the bulb socket counterclockwise and remove. Compact wheel Hints Safety measures in case of a breakdown or a wheel change ▷ Park the vehicle as far away as possible from passing traffic and on solid ground. Switch on the hazard warning system.
Replacing components Use the vehicle jack only for changing wheels Use the vehicle jack only for changing wheels Do not attempt to use it to jack up a different type of vehicle or loads of any kind; otherwise, this could cause material damage and personal injury.◀ Removing compact wheel The compact wheel is housed in a well on the underbody of the vehicle.
MOBILITY Replacing components Wheel mounting 1. Unscrew the wheel lug bolts and remove the wheel. 2. Put the new wheel or compact wheel on and screw in at least two bolts. If original MINI light alloy wheels are not mounted, any accompanying lug bolts also have to be used. while braking, extended braking distance and changed self-steering properties in the limit area.◀ Mounting only one compact wheel Only a single compact wheel may be mounted.
Replacing components Battery replacement Use approved vehicle batteries only Only use vehicle batteries that have been approved for your vehicle by the manufacturer; otherwise, the vehicle could be damaged and systems or functions may not be fully availa‐ ble.◀ After a battery replacement, have the battery registered on the vehicle by your service center to ensure that all comfort functions are fully available and that any Check Control messages are no longer displayed.
MOBILITY Replacing components Information on the fuse types and locations is found on a separate sheet. 3. Replace the fuse in question. 4. The installation is done in reverse order from the removal. 200 Online Edition for Part no.
Breakdown assistance MOBILITY Breakdown assistance Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.
MOBILITY Breakdown assistance ▷ If the LED is flashing but the MINI Response Center cannot be heard on the speaker, the hands-free system may be malfunctioning. However, the MINI Response Center may still be able to hear you. Initiating an Emergency Request automatically Under certain conditions, an Emergency Re‐ quest is automatically initiated immediately af‐ ter a severe accident. Automatic Collision Noti‐ fication is not affected by pressing the SOS button.
Breakdown assistance MOBILITY corresponding engine or body ground of the vehicle to be started. Starting the engine Never use spray fluids to start the engine. 1. Start the engine of the assisting vehicle and let it run for several minutes at an increased idle speed. The so-called starting aid terminal in the engine compartment acts as the battery's positive ter‐ minal. Open the cap of the starting aid terminal.
MOBILITY Breakdown assistance contact a service center in the event of a break‐ down. Tow the vehicle only with the front axle raised Follow the towing instructions Follow all towing instructions; otherwise, vehicle damage or accidents may occur.◀ Have the vehicle towed only with the front axle raised or transported on a loading platform; otherwise, damage may occur.
Breakdown assistance Towing other vehicles MOBILITY Tow fitting General information Light towing vehicle The towing vehicle must not be lighter than the vehicle being towed; otherwise, it will not be possible to control the vehicle re‐ sponse.◀ Attaching the tow bar/tow rope correctly Attach the tow bar or tow rope to the tow fitting; connecting it to other vehicle parts may cause damage.◀ ▷ Switch on the hazard warning system, de‐ pending on local regulations.
MOBILITY Breakdown assistance Tow-starting Automatic transmission Do not tow-start the vehicle. Due to the automatic transmission, the engine cannot be started by tow-starting. Have the cause of the starting difficulties rem‐ edied. Manual transmission If possible, do not tow-start the vehicle but start the engine by jump-starting, refer to page 202. If the vehicle is equipped with a cat‐ alytic converter, only tow-start while the engine is cold. 1.
Care MOBILITY Care Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Intense soiling and road salt can damage the vehicle.
MOBILITY Care Vehicle care Automatic transmission: 1. Drive into the car wash. 2. Engage transmission position N. 3. Press the Start/Stop button to switch off the engine. In this way, the ignition remains switched on, and two Check-Control messages are displayed. Car care products MINI recommends using cleaning and care products from MINI, since these have been tested and approved. Car care and cleaning products Follow the instructions on the container.
Care MOBILITY Use leather care products; otherwise, dirt and grease will gradually break down the protective layer of the leather surface. When cleaning rubber seals, do not use any sili‐ con-containing car care products in order to avoid damage or reduced noise damping. Suitable care products are available from the service center. Fine wood parts Upholstery material care Clean fine wood facing and fine wood compo‐ nents only with a moist rag. Then dry with a soft cloth.
MOBILITY Care Carpets and floor mats No objects in the area around the pedals Keep floor mats, carpets, and any other objects out of the area of motion of the pedals; otherwise, the function of the pedals could be impeded while driving and create the risk of an accident. Do not place additional floor mats over existing mats or other objects. Only use floor mats that have been approved for the vehicle and can be properly fixed in place. Clean with a clean, antistatic microfiber cloth.
Care Online Edition for Part no.
FIND ME. Online Edition for Part no.
AT A GLANCE CONTROLS DRIVING TIPS MOBILITY REFERENCE Online Edition for Part no.
REFERENCE Technical data Technical data Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehi‐ cle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems. Dimensions MINI Width with mirrors inches/mm 76.1/1932 Width without mirrors inches/mm 68.
Technical data REFERENCE MINI Cooper Approved rear axle load lbs 1665/1665 kg 755/755 lbs 60 kg 60 cu ft/l 8.7/211 Curb weight, road ready, with 75 kg load, with fuel tank 90 % full, without special equipment lbs 2760/2795 kg 1252/1268 Approved gross vehicle weight lbs 3620/3650 kg 1642/1656 lbs 770/775 kg 349/352 lbs 2010/2045 kg 912/928 lbs 1690/1690 kg 767/767 lbs 60 kg 60 cu ft/l 8.7/211 Cooper: fuel tank US gal/liters 10.5/40 Fuel tank US gal/liters 11.
REFERENCE Appendix Appendix Any updates to the Owner's Handbook for Ve‐ hicle are listed here. 216 Online Edition for Part no.
REFERENCE Online Edition for Part no.
REFERENCE Additional License Texts and Certifications Tire Pressure Monitoring System Israel China In accordance with the provisions on the Radio Regulations of the people's Republic of China, the radio transmission equipment, after exami‐ nation, conforms to the provisions with its CMIIT ID: 2013DJ7376 A. The use of this product does not need a wi‐ reless operation license. B. The product does not include an RF disturb‐ ance protection, and should not disturb other licensed products. C.
REFERENCE Online Edition for Part no.
REFERENCE Everything from A to Z Everything from A to Z Index A ABS, Antilock Brake Sys‐ tem 106 ACC, Active Cruise Control 110 Acceleration Assistant, refer to Launch Control 70 Accessories and parts 7 Activated-charcoal filter 132 Active cruise control, ACC 110 Additives, oil 183 Adjusting the headlamps 89 Adjustments, seats/head re‐ straints 47 Adjustments, steering wheel 54 After washing vehicle 208 Airbags 91 Airbags, indicator/warning light 92 Air circulation, refer to Recir‐ culated-air mode 128, 1
REFERENCE Everything from A to Z C California Proposition 65 Warning 7 Camera-based cruise control, ACC 110 Camera, care 210 Camera, rearview cam‐ era 120 Can holder, refer to Cu‐ pholder 142 Car battery 198 Car care products 208 Care, displays 210 Care, vehicle 208 Cargo 151 Cargo area 138 Cargo area, adapting size 143 Cargo area, enlarging 139 Cargo area lid 39 Cargo area, storage compart‐ ments 143 Cargo cover 138 Cargo, securing 152 Cargo straps, securing cargo 152 Car key, refer to Remote con‐ trol 3
REFERENCE Everything from A to Z Direction indicator, refer to Turn signals 64 Display, electronic, instrument cluster 72 Display lighting, refer to In‐ strument lighting 89 Displays 71 Displays, cleaning 210 Disposal, coolant 185 Disposal, vehicle battery 199 Distance control, refer to PDC 118 Distance to destination 80 Divided screen view, split screen 23 Door lock, refer to Remote control 34 Drive mode, GREEN mode 156 Drive-off assistant 109 Drive-off assistant, refer to DSC 106 Driving Dynamics Contro
REFERENCE Everything from A to Z Front fog lamps 89 Front passenger airbags, auto‐ matic deactivation 93 Front passenger airbags, indi‐ cator lamp 93 FTM Flat Tire Monitor 97 Fuel 166 Fuel cap 164 Fuel consumption, current 75 Fuel consumption, refer to Average fuel consump‐ tion 79 Fuel filler flap 164 Fuel gauge 74 Fuel quality 166 Fuel recommendation 166 Fuel, tank capacity 215 Fuse 199 G Garage door opener, refer to Universal garage door opener 133 Gasoline 166 Gear change, automatic trans‐ mission 68
REFERENCE Everything from A to Z Internet site 6 Interval display, service re‐ quirements 76 J Jacking points for the vehicle jack 196 Joystick, automatic transmis‐ sion 68 Jump-starting 202 K Key/remote control 34 Keyless Go, refer to Comfort Access 40 Key Memory, refer to Personal Profile 35 Kickdown, automatic trans‐ mission 68 Knee airbag 91 L Lamp replacement 189 Lamp replacement, front 190 Lamp replacement, rear 192 Lamp replacement, side 195 Lamps and bulbs 189 Language on Control Dis‐ play 82 L
REFERENCE Everything from A to Z Monitor, refer to Control Dis‐ play 18 Mounting of child restraint fix‐ ing systems 55 Multifunction steering wheel, buttons 14 Multimedia, refer to Integrated Owner's Manual N Navigation, refer to Integrated Owner's Manual Neck restraints, front, refer to Head restraints 50 Neck restraints, rear, refer to Head restraints 51 New wheels and tires 173 No Passing Information 77 Nylon rope for tow-starting/ towing 205 O OBD Onboard Diagnos‐ tics 186 Obstacle marking, rearvie
REFERENCE Everything from A to Z Remote control, malfunc‐ tion 38 Remote control, replacing the battery 34 Remote control, univer‐ sal 133 Replacement fuse 199 Replacing parts 188 Replacing the battery, remote control 34 Replacing wheels/tires 173 Reporting safety defects 9 RES button 112 Reserve warning, refer to Range 75 Reset, Tire Pressure Monitor TPM 95 Retaining straps, securing cargo 152 Retreaded tires 174 Right-hand traffic, lamp set‐ ting 89 Roadside parking lamps 86 RON recommended fuel grade 1
REFERENCE Everything from A to Z Symbols in the status field 23 T Tachometer 74 Tailgate 39 Tailgate via remote control 38 Tail lamps 192 Technical changes, refer to Safety 7 Technical data 214 Temperature, air condi‐ tioner 128 Temperature, automatic cli‐ mate control 130 Temperature display for exter‐ nal temperature 75 Temperature, engine oil 74 Terminal, starting aid 202 Text messages, supplemen‐ tary 73 Theft alarm system, refer to Alarm system 42 Theft protection, lug bolts 198 Thigh support 48 Til
REFERENCE Everything from A to Z Windshield washer nozzles 66 Windshield washer system 64 Windshield wiper 64 Windshield wipers, fold-out position 66 Winter storage, care 210 Winter tires, suitable tires 174 Winter tires, tread 172 Wiper blades, replacing 188 Wiper fluid 66 Wiper system 64 Wood, care 209 Word match concept, naviga‐ tion 25 Wrench 188 228 Online Edition for Part no.
01 40 2 927 905 ue *BL292790500G* DRIVE ME. Online Edition for Part no.
