Owner’s Manual Contents FULL PREPARATION PACKAGE MOBILE PHONE Online Edition for Part no.
Online Edition for Part no.
Online Edition for Part no.
© 2007 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. Order No. 01 41 0 014 831 US English VII/07 Printed in Germany Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling. Online Edition for Part no.
Contents Notes 4 4 Using this Owner's Manual Symbols used 4 Editorial notice Overview 5 5 5 7 The concept Making calls in the car Suitable mobile phones Menu navigation Putting the mobile phone into operation 8 10 10 10 Pairing the mobile phone with the vehicle List of paired mobile phones Deleting a mobile phone from the device list Switching the Bluetooth connection on/off Operation on the car radio 12 12 12 12 12 15 15 Voice quality Requirements Adjusting the volume Receiving a call Making a cal
Notes Using this Owner's Manual This Owner's Manual instructs you on how to register your mobile phone for the first time and how to operate it using features in the vehicle. Should the day arrive when you wish to sell your MINI, please remember to hand this Owner's Manual to the next owner; it is an important part of the vehicle.
Overview The concept Suitable mobile phones Your MINI is equipped with a full preparation package mobile phone. After one-time pairing of a suitable mobile phone with the vehicle, you can operate it using the radio, the buttons* on the steering wheel and your voice*. Ask your MINI Dealer which Bluetooth mobile phones the full preparation package mobile phone supports and for which mobile phones snap-in adapters* are available. These mobile phones support the functions described in this Owner's Manual.
Operating the mobile phone on the car radio 4 Pairing new mobile phone, deleting pairing data of mobile phone or switching Bluetooth on/off 8 > #: dial phone number 5 Time > "A-Z": phone book 6 Back > "TOP8": most frequently dialed phone numbers 7 Function buttons for confirming the function displayed above the respective button > "LAST8": most recently dialed phone numbers 8 Redialing, accepting calls, starting dialing, terminating calls, changing to telephone menu To call up the menu shown
10 Selecting and confirming functions 7 > Rotate: select function or digit > Press: activate function or digit 11 Radio on/off, volume > Press: switch car radio on/off > Rotate: adjust volume 12 This symbol on the radio display indicates that a call is being made on the hands-free system. Menu navigation Selecting and confirming a function Functions are selected and confirmed by turning the rotary button and pressing it. 1. Turn the rotary button, arrow 2, to select a function by marking it, e.g. "PHONE".
Putting the mobile phone into operation Your vehicle is able to store pairing data for up to four mobile phones at any one time. If the vehicle engine is running or the ignition is switched on, a paired mobile phone will automatically be recognized when it is located inside the vehicle. Pairing the mobile phone with the vehicle The following conditions must be met: > Suitable mobile phone: The mobile phone is supported by the full preparation package mobile phone.
8. Select the Bluetooth name of the vehicle on the mobile phone display. Pairing the mobile phone Depending on the mobile phone, you will see messages, first on the mobile phone display or on the radio, requesting you to enter the Bluetooth passkey previously determined by you. Depending on the mobile phone, you have approx. 30 seconds to enter your Bluetooth passkey on the mobile phone and radio display. Display showing that the Bluetooth passkey can now be entered on the radio: : 9.
5. To repeat pairing: Press the button repeatedly until the mobile phone is in the desired position. 1. Press button. 2. Repeat steps 6 to 13. If pairing remains unsuccessful after several attempts, contact Customer Relations. To display the Customer Relations phone number: Deleting a mobile phone from the device list If you no longer wish to operate a particular mobile phone on the vehicle, you can delete the pairing data of that mobile phone. 1. Switch off the mobile phone. 2. Press button. 3.
To temporarily deactivate the Bluetooth connection between the vehicle and your mobile phone: 1. Press button. 2. Press button. 3. Press button. 4. Press button. 5. Press button. To reactivate the Bluetooth connection: 1. Press button. 2. Press button. Online Edition for Part no.
Operation on the car radio The following functions can be operated on the radio: Adjusting the volume > Accepting/rejecting calls > Dialing a phone number > Dialing a phone number from the phone book > Dialing a stored phone number, e.g. from the list of accepted calls > Terminating a call When the ignition and the radio standby mode are switched off, e.g. after taking the remote control out of the ignition switch, you can continue an ongoing call via the hands-free system for a maximum of 25 minutes.
2. mobile phone consist of a name and phone number and are arranged in alphabetical order. Press button 3. Press button. 4. Enter the desired phone number on buttons 0-9. To delete the last digit if necessary: Press button. 5. Press the button on the radio or steering wheel. Alternatively: Press the button to dial the phone number. For your phone number to be displayed to the person you are calling, display of the phone number must be enabled by your service provider.
Rotate the button to display the additional letters. Dialing a phone number from a list of stored numbers 4. Rotate the button to select the initial letter of the desired entry. To select an entry and establish a connection: 5. 2. Press the desired button if neces- 1. Press button. Press button. sary. The phone number is dialed. To display all entries: 1. Rotate the button to select the initial letter of the desired entry and press the button. 2.
Displaying the call duration You can have the duration of the call displayed during the call. Press button. Continuing an active call on the hands-free system or mobile phone From mobile phone to hands-free system* You can continue a call that began beyond the Bluetooth range of the vehicle on the hands-free system if the engine is running or the ignition is switched on. Depending on the type of mobile phone, calls are automatically switched to the hands-free system.
Operation by voice* The concept You can operate your mobile phone without having to remove your hands from the steering wheel. Messages and questions will support you as you make your entries. The same requirements apply as when operating the mobile phone on the radio, refer to page 12. Commands The system understands predefined commands that must be said word for word. Opening help You can have the available commands read aloud for you at any time: {Help}.
Dialing a phone number – an example Briefly press the button on the steering wheel. You say Voice control responds {Dial number} {{Please speak the number}} e.g. {555-0100} e.g. {{555-0100. Continue?}} {Dial} {{Dialing}} Adjusting the message volume Correcting a phone number After the last spoken sequence of digits has been repeated by the system, you can delete this sequence of digits. {Correction}. The sequence of digits is deleted. The {Correction} command can be repeated as often as necessary.
Storing an entry An entry always consists of a name and phone number. 1. {Store name}. The dialog for storing a name is opened. 2. Say the name. The spoken length of names in the phone book must not exceed approx. 2 seconds. 3. Say the phone number after being prompted to do so by the system. 4. To store the phone number: {Store number}. Dialing the phone number of an entry 1. {Dial name}. The dialog for selecting an entry is opened.
Mini contact* You can call up various service numbers on the display. > "Road Assist": Mobile Service*, if you need assistance in case of a breakdown. > "Serv. Appt.": MINI Dealer, to arrange a service appointment, for example. > "Customer Relations": Customer Relations*, for any information you may need on your vehicle. Displaying the phone numbers 1. Press button. 2. Press button. 3. Turn the button until the desired phone number is displayed. Online Edition for Part no.
Snap-in adapter Inserting/removing the snap-in adapter Inserting/removing the mobile phone 1. Press area 1 surrounding the button and remove the cover. 1. Depending on the type of mobile phone, remove the protective cap of the mobile phone antenna connector so that the mobile phone can snap into place in the snap-in adapter. 2. With the buttons facing up, slide the mobile phone toward the connectors and press down until it snaps into place. 2.
01 41 0 014 831 ue Cell. Prep. *BL001483100J* TALK TO ME. Online Edition for Part no.
