Operating instructions

CONTENTS
14
Connection with CDR. Connection with PCM.
Pairing BlackBerry
®
devices
Step 1
Select ‘Settings/Networks and Connections/
Bluetooth Connections’ from the menu on the
BlackBerry
®
and activate Bluetooth
®
.
Step 2
Press the ‘PHONE’ button on PCM. To speed
up the search by PCM and allow external SIM
access, BlackBerry
®
devices have the option
of a standby mode.
Step 3
Select ‘Find telephone’ from the menu on
PCM and, where applicable, on the next
screen select the menu item ‘New mobile
phone’. A search is performed for previously
unknown Bluetooth
®
phones. At the end of the
search, the available devices are displayed in
a list.
Step 4
Select the BlackBerry
®
from the search list
on PCM.
Step 5
Enter the Bluetooth
®
code specified by
PCM on the BlackBerry
®
. Entering this code
completes the pairing process. In Porsche
models from November 2012, PCM supports
Secure Simple Pairing. With this, there is no
need for the user to enter the Bluetooth
®
code. Instead, it is simply a case of confirming
whether the six-digit codes displayed on both
devices match each other.
Step 6
Accept PCM’s connection request on the
BlackBerry
®
. Make sure that you tick ‘Do not
ask this question again’.
Step 7
The BlackBerry
®
is now connected to PCM via
Bluetooth
®
. The connection will be established
automatically whenever the vehicle is started.
Step 1
Press the ‘PHONE’ button on CDR.
Step 2
Press the ‘OPTION’ button on CDR.
Step 3
Select ‘Device list’ from the menu on CDR.
CDR is now visible to external devices.
Step 4
On the BlackBerry
®
, select ‘Settings/
Networks and Connections/Bluetooth
Connections’ from the menu and activate
Bluetooth
®
. Select ‘Add/search for new
device’. The BlackBerry
®
now starts to
search for visible Bluetooth
®
devices.
Step 5
Select ‘CDR’ from the search list on the
BlackBerry
®
.
Step 6
A number pad is displayed on CDR; enter any
four-digit Bluetooth
®
code of your choice (e. g.
‘0000’) and confirm with ‘OK’.
Step 7
The same Bluetooth
®
code must now be
entered on the BlackBerry
®
and confirmed
with ‘OK (8 )’. Pairing is now complete.
Step 8
Accept CDR’s connection request on the
BlackBerry
®
. Make sure that you tick ‘Do not
ask this question again’.
Step 9
The BlackBerry
®
is now connected to CDR via
Bluetooth
®
. The connection will be established
automatically whenever the vehicle is started.