Contents A-Z Owner's Manual MINI Online Edition for Part no.
Online Edition for Part no.
COOPER COOPER S Congratulations on your new MINI This Owner's Manual should be considered a permanent part of this vehicle. It should stay with the vehicle when sold to provide the next owner with important operating, safety and maintenance information. We wish you an enjoyable driving experience. Online Edition for Part no.
© 2006 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. Order No. 01 41 0 013 096 US English XI/06 Printed in Germany Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling. Online Edition for Part no.
Contents At a glance The fastest way to find information on a particular topic or item is by using the index, refer to page 134.
Notes Notes Using this Owner's Manual We have tried to make all the information in this Owner's Manual easy to find. The fastest way to find specific topics is to refer to the detailed index at the back of the manual. If you wish to gain an initial overview of your vehicle, you will find this in the first chapter. Should you wish to sell your MINI at some time in the future, remember to hand over this Owner's Manual to the new owner; it is an important part of the vehicle.
Bear in mind that the manual may contain information on accessories and equipment that you have not specified for your own vehicle. Sections describing options and special equipment are marked by asterisks * to assist you in identifying possible differences between the descriptions in this manual and your own vehicle's equipment. If your MINI features equipment not described in this Owner's Manual, observe the enclosed Supplementary Owner's Manuals.
Notes including operation of any mobile phone from within the vehicle without using an externally mounted antenna, or transceiver equipment, for instance, CBs, walkie-talkies, ham radio or similar accessories, may cause extensive damage to the vehicle, compromise its safety, interfere with the vehicle's electrical system or affect the validity of the MINI Limited Warranty. See your MINI Dealer for additional information.
other information about motor vehicle safety from http://www.safercar.gov For Canadian customers At a glance Canadian customers who wish to report a safety-related defect to Transport Canada, Defect Investigations and Recalls, may call 1-800-333-0510 toll-free from anywhere in Canada or 1-613-993-9851 from the Ottawa region and from other countries, or contact Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville, Tower C, 330 Sparks Street, Ottawa, ON, K1A 0N5.
Online Edition for Part no.
At a glance At a glance Controls Driving tips Mobility Reference Online Edition for Part no.
Cockpit Cockpit Around the steering wheel: Controls and displays 10 Online Edition for Part no.
Buttons* on left of steering wheel > Press: accepting and ending a call, starting dialing* of selected phone number and redialing if no phone number is selected Low beams 59 Automatic headlamp control* 59 > Press longer: redialing Turn signals 39 Roadside parking lamps* 61 Activating/deactivating voice command system* Computer* 45 Changing radio station Selecting music track Scrolling through phone book and lists with stored phone numbers Tachometer 12 Instrument lighting 62 4 5 Wiper system 40
Cockpit Displays 1 Tachometer 44 4 2 Display for > Computer* 45 > Clock 44 > Date of next scheduled service, and remaining distance to be driven 49 > Outside temperature 44 3 Display for > Position of automatic transmission* 37 > Indicator and warning lamps 13 > Current vehicle speed 44 > Odometer and trip odometer 44 > Indicator and warning lamps 13 > Initializing Flat Tire Monitor 55 > Settings and information 46 Resetting the trip odometer 44 > Personal Profile settings 18 5 Instrumen
Indicator and warning lamps Controls At a glance The concept Indicator and warning lamps can light up in various combinations and colors in the indicator areas 1 and 2. Some lamps are checked for proper functioning and thus come on briefly when the engine is started or the ignition is switched on.
Cockpit Around the center console 14 Online Edition for Part no.
3 Maximum cooling* 67 Reading lamps* 63 Cooling function* 65, 68 Color of ambient lighting* 63 Defrosting windows* 66, 67 Glass sunroof, electric* 26 Rear window defroster 65, 67 Interior lamps 62 Windshield heating* 66, 68 Air flow rate 65, 66 4 Hazard warning flashers 5 Speedometer 12 6 Audio CD drive* 7 Switching audio sources on/off and adjusting volume Seat heating* 30 8 Heating, air conditioner or automatic climate control* Power windows 26 9 Temperature 65, 67 Recirculated-air
Online Edition for Part no.
At a glance Controls Controls Driving tips Mobility Reference Online Edition for Part no.
Opening and closing Opening and closing Keys/remote controls New remote controls Your MINI Dealer can supply new remote controls with integrated keys as additional units or as replacements in the event of loss. Personal Profile The concept Remote control with integrated key Each remote control contains a rechargeable battery that is automatically recharged when it is in the ignition lock while the car is being driven.
> Triple turn signal activation 40 > Audio volume, refer to separate Owner's Manual > Speed-dependent volume, refer to separate Owner's Manual Central locking system The concept The central locking system is ready for operation whenever the driver's door is closed. The system simultaneously engages and releases the locks on the following: > Doors > Tailgate Opening and closing: from outside Using the remote control Persons or animals in a parked vehicle could lock the doors from the inside.
Opening and closing 5. Press and hold the button until the display changes. 1. Switch on the ignition, refer to page 35. 6. Briefly press the button repeatedly until the display shows the illustrated symbol, arrow. 2. Briefly press the button in the turn indicator lever repeatedly until "SET/INFO" is displayed. 7. Press and hold the button until the display changes. 3. Press and hold the button until the display changes. 8. Briefly press the button to select: 4.
An acoustic signal sounds during unlocking/locking. > The hazard warning flashers light up and an acoustic signal sounds during unlocking/locking. > The function is deactivated. 9. Press and hold the button until the display changes. The setting is stored. Switching on interior lamps While the car is locked: Press the button. You can also use this function to locate your vehicle in parking garages, etc. Compliance statement: This device complies with part 15 of the FCC Rules.
Opening and closing ing the integrated key in the door lock to the end positions. Opening and closing: from inside 1. Switch on the ignition, refer to page 35. 2. Briefly press the button in the turn indicator lever repeatedly until "SET/INFO" is displayed. 3. Press and hold the button until the display changes. The switch locks or unlocks the doors and tailgate when the doors are closed, but the antitheft system is not activated. The fuel filler door remains unlocked*. 4.
locks the vehicle after some time if no door has been opened. 1. Fold the rear seat bench upward. > At a glance The central locking system automatically locks the vehicle as soon as you drive off. > The central locking system automatically locks the vehicle after some time if no door has been opened, or as soon as you drive off. The central locking system remains unlocked. 9. Press and hold the button until the display changes. The setting is stored. 2. Pull the ring. The tailgate is released.
Opening and closing Alarm system preparation package* > The engine can only be started when the vehicle detects that the remote control is inside the vehicle. > Doors and tailgate must be closed to be able to operate the windows and glass sunroof. Comparison to standard remote controls In vehicles with an alarm system preparation package, LEDs are located on the tachometer. If the vehicle is equipped with an alarm system, the LEDs indicate the various functional states.
If the doors and tailgate are closed again and the remote control is located inside the vehicle, the windows and the glass sunroof can be operated again. Insert the remote control into the ignition lock to be able to operate the windows or glass sunroof when the engine is switched off and the doors are open. Switching on radio readiness Switch on radio readiness by briefly pressing the start/stop button, page 35. Do not depress the brake or the clutch, otherwise the engine will start.
Opening and closing Take the old battery to a battery collection point or to your MINI Dealer.< Windows To prevent injuries, exercise care when closing the windows and keep them in your field of vision until they are shut. Take the remote control with you when you leave the car, otherwise children could operate the electric windows and possibly injure themselves.
Sun blind The sun blind can be opened and closed independently of the glass sunroof. At a glance Following interruptions in electrical power supply After a power failure, there is a possibility that the glass sunroof can only be raised. In this case, have the system initialized. The manufacturer of your MINI recommends that you have this work done by your MINI Dealer.
Adjustments Adjustments Sitting safely The ideal sitting position can make a vital contribution to relaxed, fatigue-free driving. In conjunction with the safety belts, the head restraints and the airbags, the seated position has a major influence on your safety in the event of an accident. To ensure that the safety systems operate with optimal efficiency, we strongly urge you to observe the instructions contained in the following section.
Backrest At a glance incline the backrest too far to the rear while the vehicle is being driven, otherwise there is a danger in the event of an accident of sliding under the safety belt, eliminating the protection normally provided by the belt.< Comply with the instructions on head restraint height on page 30 and on damaged safety belts on page 31. Seat adjustment Pull the lever and apply your weight to the backrest or lift it off, as necessary.
Adjustments Height adjustment 1. Pull up the lever on the seat backrest, arrow 1. The backrest folds forward. To raise: pull up. 2. Slide the seat forward, arrow 2. To lower: press the button, arrow 1, and slide the head restraint down. Previous position Removing 1. Push the seat back into its previous position. 1. Pull up as far as it will go. Do not fold the backrest up until the seat is in its previous position. Otherwise, the seat will engage in its current position.
only by a MINI Dealer or by a workshop that has specially trained personnel working in accordance with the specifications of the MINI manufacturer, otherwise correct operation of these safety systems is not ensured.< Mirrors At a glance Before every drive, make sure that all occupants wear their safety belts. Airbags complement the safety belt as an additional safety device, but they do not represent a substitute. Closing Make sure you hear the lock engage in the belt buckle.
Adjustments Interior rearview mirror 1. Fold the lever down. To reduce glare from vehicles behind you when you are driving at night: Turn the knob. Interior mirror, automatic dimming* 2. Move the steering wheel to the preferred distance and angle to suit your seated position. 3. Swing the lever back up. Do not use force to swing the lever back up, otherwise the mechanism will be damaged.< Electric steering wheel lock The steering wheel locks or unlocks automatically when the key is removed or inserted.
The right place for children Child-restraint systems, installation Do not leave children unattended in the vehicle, otherwise they could endanger themselves and/or other persons by opening the doors, for example.< Observe the child-restraint system manufacturer's instructions when selecting, installing and using child-restraint systems. Otherwise the protective effect may be diminished.
Transporting children safely 3. Allow the safety belt strap to retract all the way. Placement of the tether strap LATCH child-restraint fixing system LATCH: Lower Anchors and Tethers for CHildren. When installing and using a LATCH child's seat, comply with the system manufacturer's operating and safety instructions.< Anchor points for LATCH anchors Before installing the child's seat, pull the belt out of the area for the child-restraint fixing system.
Driving Start/stop button Insert the key all the way into the ignition lock. Briefly press the start/stop button to switch radio readiness or the ignition on or off. Do not depress the brake or clutch while doing so. Removing the key from the ignition lock Individual electrical consumers can operate. The time and outside temperature are displayed in the tachometer. Press in the key briefly. It is ejected slightly.
Driving Starting the engine Do not allow the engine to run in enclosed spaces; otherwise inhalation of the noxious exhaust gases can lead to unconsciousness and death. Exhaust gases contain carbon monoxide, an odorless and colorless, but highly toxic gas. Never leave an unattended vehicle with the engine running, otherwise such a vehicle represents a potential safety hazard.
The parking brake is primarily intended to prevent the vehicle from rolling while parked; it brakes the rear wheels. Applying The lever locks in position automatically. Releasing Reverse gear Select this only when the vehicle is stationary. When the gearshift lever is pressed to the left, a slight resistance has to be overcome. Automatic transmission* with Steptronic At a glance Parking brake In addition to the fully automatic mode, you can shift gears manually using Steptronic, page 38.
Driving > Before moving the lever away from P or N with the vehicle stationary, first depress the brake; otherwise the selector lever will refuse to move: shiftlock. To prevent the vehicle from creeping after you select a driving position, depress the brake until you are ready to start.< Depress the accelerator pedal beyond the fullthrottle resistance point. Sport program and manual operation M/S A lock prevents accidental shifting into selector lever positions R and P.
transmission automatically returns to D, automatic drive. > Engine responds more spontaneously to movements of the accelerator. > Steering response is more direct. > More rapid gear shifting in Sport program Activating the system At a glance With automatic transmission: > Pull one of the shift paddles. Transmission shifts up. Controls > Push one of the shift paddles. Transmission shifts down. M1 to M6 is displayed in the gear indicator. Press the SPORT button. Overriding the selector lever lock 1.
Driving Indicating a turn briefly Press the lever as far as the resistance point for as long as you wish to indicate a turn. 6. Briefly press the button repeatedly until the display shows the illustrated symbol, arrow. Triple turn signal activation Press the lever as far as the resistance point. Turn signal flashes once. You can set whether the turn signal is to flash once or three times. 1. Switch on the ignition, refer to page 35. 2.
Press the lever upward once, arrow 1. Deactivate the rain sensor before entering an automatic car wash. Failure to do so could result in damage caused by undesired wiper activation.< Deactivating intermittent wipe or rain sensor Press the lever downward once, arrow 4. Brief wipe Press the lever downward once, arrow 4. Do not use the washers when the washer fluid reservoir is empty, otherwise you will damage the washer pump.
Driving Washer fluid Activating Washer fluid antifreeze is flammable. Always keep it well away from sparks and open flames, and store it in the tightly closed original container, well out of the reach of children. Comply with the instructions on the container.< Washer fluid reservoir 1 Resuming cruise control 2 Activating/deactivating cruise control 3 Maintaining, storing and increasing speed 4 Maintaining, storing and decreasing speed The indicator lamp in the speedometer comes on.
Increasing speed At a glance Press button 3 repeatedly until the desired speed is reached. Every time you press the button, the speed increases by approx. 2 mph or 2 km/h. Accelerating using the button Press and hold button 3. The vehicle accelerates without pressure on the accelerator pedal. After the button is released, the driving speed is maintained and stored. Decreasing speed Controls Press button 4 repeatedly until the desired speed is reached.
Everything under control Everything under control Odometer, outside temperature display, clock The outside temperature then appears in the bottom display. Odometer and trip odometer Resetting the trip odometer With the ignition switched on, press knob 3 in the tachometer.
Fuel gauge Computer* At a glance Displays in tachometer You can find information on refueling on page 84. If the tilt of the vehicle varies for a longer period, when you are driving in mountainous areas, for example, the indicator may fluctuate slightly. Press the button in the turn indicator lever repeatedly to call up various items of information.
Everything under control Current fuel consumption Displays the current fuel consumption to allow you to see whether your current driving style is conducive to fuel economy with minimum exhaust emissions. Average speed Periods with the vehicle parked and the engine switched off are not included in the calculations of average speed. To reset average speed: press the button in the turn indicator lever for approx. 2 seconds.
6 Adjusting settings 7 > Confirmation signals when locking and unlocking the vehicle 20 8 Setting the date 51 9 Exiting the menu Setting the time 50 At a glance > Response during unlocking procedure 19 > Automatic locking 22 > Pathway lighting 59 > Daytime running lamps 60 Formats and units of measure Exiting displays To set the formats and units of measure. The settings are stored for the remote control currently in use, refer also to Personal Profile on page 18.
Everything under control 5. Press and hold the button until the display changes. 6. Briefly press the button repeatedly until the display shows the illustrated symbol, arrow. > > Fuel consumption: l/100 km, mpg, km/l* Distance covered: mls, km > Time: 12h, 24h mode > Date: day.month dd.mm, month/day mm/dd > 1. Briefly press the button in the turn indicator lever repeatedly until "SET/INFO" is displayed. 2. Press and hold the button until the display changes. 3.
4. Briefly press the button repeatedly until the corresponding symbol and "SERVICE-INFO" are displayed. The remaining driving distance and the date of the next scheduled service are briefly displayed immediately after you start the engine or switch on the ignition. The extent of service work required can be read out from the remote control by your MINI Dealer.< 5. Press and hold the button until the display changes. 6.
Everything under control Possible displays 1 Button for selecting information 6 Roadworthiness test 2 Engine oil 7 Brake fluid 3 Front brakes 8 Exit display 47 4 Rear brakes 9 Next setting or item of information 47 5 Vehicle check More information on the MINI Maintenance System can be found on page 98. Clock 2. Press and hold the button until the display changes. Setting the time 3. Briefly press the button repeatedly until the symbol and "SET" are displayed.
6. Wait for the display to change to minutes. Check Control 7. Press the button to set the minutes. Date Setting the date The concept The Check Control monitors vehicle functions and alerts you to any malfunctions in the systems monitored. Such a Check Control message includes indicator or warning lamps in the displays and, in some circumstances, an acoustic signal. At a glance 8. Wait for the display to change. The settings are stored.
Everything under control Other Check Control messages are automatically hidden after approx. 20 seconds, but remain stored. 4. Hold the button down. "CHECK OK" appears if there are no Check Control messages. If a Check Control message has been stored, the corresponding message is displayed. 5. Briefly press the button to check for other messages. This symbol indicates that Check Control messages have been stored. Check Control messages can be viewed whenever it is convenient.
PDC assists you with parking backwards. Acoustic signals warn you of the presence of an object behind the vehicle. To measure the distance, there are four ultrasonic sensors in either bumper. However, an acoustic warning does not sound until an object is approx. 24 in/60 cm from the corner sensors, or approx. 5 ft/1.50 m from the center sensors. PDC is a parking aid that can indicate objects when they are approached slowly, as is usually the case when parking.
Technology for driving comfort and safety ABS Antilock Brake System ABS prevents locking of the wheels during braking. Safe steering response is maintained even during full braking. Active safety is thus increased. past the front wheels. In these cases, DSC helps the vehicle maintain a safe course within physical limits by reducing engine output and through braking actions at the individual wheels. Braking safely, refer to page 77.
Drive cautiously and think well ahead, otherwise unstable driving conditions could result.< The Flat Tire Monitor is unable to warn the driver of sudden, severe tire damage caused by external factors, nor can it identify the gradual loss of pressure that will inevitably occur in all four tires over a lengthy period of time.< Hill Start Assist* In the following situations, the system could be delayed or malfunction: > System has not been initialized > Driving on snowy or slippery road surface 1.
Technology for driving comfort and safety 4. Briefly press the button repeatedly until the corresponding symbol and "RESET" are displayed. steering maneuvers. Do not exceed a speed of 50 mph or 80 km/h. Do not continue driving if the vehicle is not equipped with Run-Flat Tires, page 92, otherwise a serious accident could result.< 2. At the next opportunity, check the air pressure in all four tires.
2 Side airbag 3 Head airbag Protective action Observe the instructions on page 28 to ensure the best possible personal protection.< The front airbags help protect the driver and front passenger by responding to frontal impacts in which safety belts alone cannot provide adequate restraint. When needed, the head and side airbags help provide protection in the event of side impact. The relevant side airbag supports the side upper body area. The head air bag supports the head.
Technology for driving comfort and safety vated by adolescents and adults sitting in certain positions; the indicator lamp for the front passenger airbags comes on. In such cases, the passenger should change his or her sitting position so that the front passenger airbags are activated and the indicator lamp goes out. If the desired airbag status cannot be achieved by changing the sitting position, transport the relevant passenger on a rear seat.
Parking lamps/low beams The headlamps may also come on when the sun is sitting low on a blue sky. When driving into tunnels with bright overhead lights, there may be a delay before the headlamps come on. At a glance Lamps Parking lamps and daytime running lamps 2 Low beams 3 Automatic headlamp control* Parking lamps Turn the light switch to position 1. The front, rear and side vehicle lighting is switched on. Activation of lights on one side of the vehicle for parking, page 61.
Lamps Setting the duration or deactivating the function 8. Briefly press the button to select: > The function is deactivated. 1. Switch on the ignition, refer to page 35. 2. Briefly press the button in the turn indicator lever repeatedly until "SET/INFO" is displayed. > ... Select the corresponding duration, e.g. 40 seconds. 9. Press the button for a longer period. The setting is stored. Daytime running lamps 3. Press and hold the button until the display changes. 4.
High beams/roadside parking lamps 5. Press and hold the button until the display changes. 1 6. Briefly press the button repeatedly until the display shows the illustrated symbol, arrow. Turn signal indicators/roadside parking lamps* 2 Switching on high beams 3 Switching off high beams/headlamp flasher Controls At a glance 4. Briefly press the button repeatedly until the symbol and "SET" are displayed. Roadside parking lamps, left or right* 7. Press and hold the button until the display changes.
Lamps Fog lamps* Increasing brightness 1 Fog lamps* 2 Rear fog lamp* Press and hold the button until the desired brightness is reached. Press the respective switch to turn the lamps on/ off. Reducing brightness Fog lamps* The brightness decreases every time the button is pressed briefly. The parking lamps or low beams must be switched on for the fog lamps to operate. The green indicator lamp comes on when the fog lamps are switched on.
At a glance Reading lamps* To switch the reading lamps on and off. Press the switch. Driving tips Controls Ambient lighting* The color of the ambient lighting can be changed. > Press the switch forward. The color changes in stages, ultimately to orange. Mobility > Press the switch toward the rear. The color changes in stages, ultimately to blue. Reference Intermediate settings and colors are possible. Online Edition for Part no.
Climate Climate Equipment versions Air vents Depending on your vehicle's equipment, your MINI may contain an air conditioner or an automatic climate control*. 3 Airflow directed toward the windshield and side windows 4 Air to the upper body area 1 Air conditioner Automatic climate control* 5 Air to the footwell 2 64 Online Edition for Part no.
Air flow rate 5 Rear window defroster 2 Cooling function 6 Air distribution 3 Recirculated-air mode 7 Windshield heating 4 Temperature Switching the system on/off Turn the air flow rate rotary switch to 0. Blower and air conditioner are completely switched off and the air supply is cut off. Set any desired air flow rate to switch on the air conditioner. Cooling function When the cooling function is on, the air is cooled, dried, then reheated according to the temperature setting.
Climate more quickly when the cooling function* is also activated. Windshield heating* The windshield heating is switched off automatically after a short time. 3. Set to the highest temperature, red. 4. Deactivate recirculated-air mode. Defrosting windows and removing condensation 1. Set air flow rate to the maximum level. 2. Set air distribution to position . Condensation is removed from the windows 5. Turn on windshield heating if necessary. 6. Turn on rear window defroster if necessary.
Maximum cooling The AUTO program adjusts the air distribution to the windshield and side windows, towards the upper body area and into the footwell for you. The air flow rate and your temperature specifications will be adapted to outside influences in accordance with seasonal changes, e.g. sunlight. At outside temperatures above 32 7/0 6 and when the engine is running, you obtain a maximum cooling effect as soon as possible. No display: outside air flows in continuously.
Climate Windshield heating* The windshield heating is switched off automatically after a certain time. Opening/closing Turn the knob. Direction of air flow Swivel the entire jet. Cooling function When the cooling function is on, the air is cooled, dried, then reheated according to the temperature setting. Depending on the weather, the windshield may fog over briefly when the engine is started or the cooling function is switched off. The recirculated-air mode may is switched on automatically.
HomeLink is a registered trademark of Johnson Controls, Inc.< Programming If you decide to sell your vehicle one day, in the interest of your own security, remember to clear the stored programs before the vehicle leaves your possession, page 70. To prevent possible damage or injury, before programming or using the integrated universal remote control, always inspect the immediate area to make certain that no people, animals or objects are within the pivoting or travel range of the device being operated.
Practical interior accessories The corresponding memory button 1 is now programmed with the signal of the original hand-held transmitter. The corresponding memory button 1 is now programmed with the signal of the original hand-held transmitter. You can operate the system with the engine running or with the ignition switched on. Clearing stored programs If the system fails to function even after repeated programming, check whether the original hand-held transmitter uses an alternating-code system.
You can connect an external audio device such as a CD or MP3 player and play audio recordings over the vehicle loudspeakers. The volume and tone settings can be adjusted via the car radio, refer to the Owner's Manual for Radio. At a glance Connection for external audio device Opening Turn the switch to the horizontal position, see arrow. Controls Closing Turn the switch to the vertical position.
Practical interior accessories Storage compartment on the front passenger side* Emptying Remove the entire ashtray. Lighter With the engine running or the ignition switched on, press in the cigarette lighter. The lighter can be pulled out as soon as it pops back out. Opening Briefly press the bottom edge of the cover. Hold or touch the hot cigarette lighter by the knob only. Holding or touching it in other areas could result in burns.
At a glance Controls Driving tips Mobility Reference Online Edition for Part no.
Online Edition for Part no.
At a glance Controls Driving tips Driving tips Mobility Reference Online Edition for Part no.
Things to remember when driving Things to remember when driving Break-in period Moving parts need breaking-in time to adjust to each other. Please follow the instructions below in order to achieve the optimal service life and economy of operation for your vehicle. Engine and differential Always obey all official speed limits.
Hills When driving on wet or slushy roads, reduce road speed. If you do not, a wedge of water can form between tires and road surface. This situation, known as hydroplaning, can cause partial or complete loss of tire contact with the road surface, so that the car cannot be steered or braked properly.< To prevent overheating and the resulting reduced efficiency of the brake system, drive long or steep downhill gradients in the gear in which the least braking is required.
Things to remember when driving vehicle. Traces of condensed water under the vehicle are therefore normal. In the Cooper S, the coolant pump may continue to run for some time after the engine is switched off. This will generate noise in the engine compartment. 1. Unhook the lift straps from the tailgate. 2. Pull the cover out of the holders toward the rear. Before driving into a car wash For general information about vehicle care for your MINI, refer to the chapter beginning on page 100.
1. Pull the lever, arrow 1, and fold the rear seat backrest forward. 2. Fold up the lever of the backrest lock until it audibly engages, arrow 2. 3. Fold back the backrest until it engages. If the cargo area has been expanded, do not install child-restraint systems in the rear of the vehicle as their protective features may be ineffective.< 6. If your vehicle will be towing a trailer, part of the load from your trailer will be transferred to your vehicle.
Things to remember when driving > For very heavy cargo when the rear seat is not occupied, secure each safety belt in the respective opposite buckle. Mounting points Securing cargo Remove the cover panel Loading roof-mounted luggage rack > Secure smaller and lighter items using retaining or draw straps*. > Heavy-duty cargo straps* for securing larger and heavier objects are available at your MINI Dealer. Four lashing eyes are provided for attaching the cargo straps.
At a glance Controls Driving tips Mobility Reference Online Edition for Part no.
Online Edition for Part no.
At a glance Controls Driving tips Mobility Mobility Reference Online Edition for Part no.
Refueling Refueling Switch off the engine before refueling, otherwise fuel cannot be added to the tank and a message will be displayed.< 1. Remove the cover from the right-hand sidewall of the cargo area. Take all precautionary measures and observe all applicable regulations when handling fuel. Do not carry any spare fuel containers in your vehicle. They can develop a leak and cause an explosion or cause a fire in the event of an accident.< Gas cap 2. Pull on the green knob with the fuel pump symbol.
Approx. 13.2 US gallons/50 liters, including the reserve capacity of 2.1 US gallons/8 liters. Do not continue driving to the point where the fuel tank is totally empty. Otherwise engine performance is not guaranteed and damage could occur.< Fuel specifications tions such as high ambient temperature and high altitude.
Wheels and tires Wheels and tires Tire inflation pressures Information for your safety It is not merely the tires' service life, but also driving comfort and, to a great extent, driving safety that depend on the condition of the tires and the maintenance of the specified tire pressure. Checking pressure Check the tire inflation pressure regularly and correct it, if necessary: at least twice a month and before starting long trips.
not exceed this speed, otherwise tire damage and accidents could occur.< At a glance Tire inflation pressures for driving above 100 mph or 160 km/h In order to drive at maximum speeds in excess of 100 mph or 160 km/h, adjust pressures to the respective tire inflation pressures listed on the following pages in the columns for traveling speeds including those exceeding 100 mph or 160 km/h. Otherwise tire damage and accidents could occur.
Wheels and tires MINI Cooper tire inflation pressures Tire size Pressure specifications in psi/kPa Speeds up to a max. of 100 mph / 160 km/h Speeds including those exceeding 100 mph / 160 km/h All pressure specifications in the table are indicated in psi/kilopascal with cold tires.
MINI Cooper S tire inflation pressures Pressure specifications in psi/kPa At a glance Speeds including those exceeding 100 mph / 160 km/h All pressure specifications in the table are indicated in psi/kilopascal with cold tires.
Wheels and tires Tire coding DOT Quality Grades Knowledge of the labeling on the side of the tire makes it easier to identify and choose the right tires. Tire size Tread wear Traction AA A B C Temperature A B C All passenger car tires must conform to Federal Safety Requirements in addition to these grades.< 225/45 R 17 91 V e.g.
Minimum tread depth Winter and all-season tires. These have better winter properties than summer tires. XL Designation for specially reinforced tires. Tire condition Inspect your tires regularly for tread wear, signs of damage and for foreign objects lodged in the tread. Check the tread depth. Tread depth The tread depth should not drop below 1/8 in/ 3 mm, although, for example, European legislation only specifies a minimum tread depth of 1/16 in/1.6 mm.
Wheels and tires 6 years, regardless of the actual wear of the tires. Run-Flat Tires* The symbol identifying Run-Flat Tires is a circle with the letters RSC on the sidewall. Run-Flat Tires comprise a conditionally self-supporting tire and a special rim. The reinforcement in the sidewalls ensures that the tire can continue to be used subject to certain restrictions, even if depressurized.
Special characteristics of winter tires The manufacturer of your MINI recommends winter tires for driving in adverse winter road conditions. Although all-season M+S tires provide better winter traction than summer tires, they generally fail to provide the same levels of cold-weather performance as winter tires. Pay attention to speed Always comply with the speed limit for the winter tires mounted on your car; failure to do so could result in tire damage and accidents.
Under the bonnet Under the bonnet Do not work on the car unless you possess the necessary technical knowledge. If you are not familiar with the regulations to be observed, have the necessary work on your vehicle carried out only by a MINI Dealer or a workshop that has specially trained personnel working in accordance with the specifications of the MINI manufacturer. If this work is not carried out properly, there is a danger of subsequent damage and related safety hazards.
1 Vehicle identification number 5 Coolant expansion tank 96 2 Battery, under the cover 112 6 3 Engine oil dipstick 95 Reservoir for washer fluid for the headlamp and window washer system 42 4 Engine oil filler neck 96 7 Fuses 111 Driving tips Controls At a glance Important parts of the engine compartment Engine oil The engine oil consumption is dependent on driving style and driving conditions. 2. Switch off the engine. 3. Pull the dipstick out after approx.
Under the bonnet Adding engine oil If MINI High Performance Synthetic Oil is not available, you can add small quantities of another synthetic oil in between oil changes. Only use oils with the API SH specification or higher. If you have any further questions regarding MINI High Performance Synthetic Oil or approved synthetic oils, your MINI Dealer will be glad to advise you.
pressure to escape, then continue turning to open. 3. The coolant level is correct if it is between the Min and Max markings. At a glance 4. If the coolant is low, slowly add coolant up to the specified level; do not overfill. 5. Turn the cap until there is an audible click. Reference Mobility Driving tips Controls 6. Have the reason for the coolant loss eliminated as soon as possible. Online Edition for Part no.
Maintenance Maintenance MINI Maintenance System Make sure that the date in the tachometer is always set correctly, page 51; otherwise the effectiveness of Condition Based Service CBS is not assured.< Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models The MINI Maintenance System supports the preservation of the traffic and operating safety of your MINI. The objective is to optimize efforts with respect to minimal vehicle maintenance costs.
Exhaust emission values At a glance The warning lamps light up. The exhaust emission values have turned poor and there is a danger of engine damage. You can continue your journey, but moderate your speed and exercise due caution. Have the car checked as soon as possible. Canadian models display these warning lamps. Controls Under certain conditions one of the lamps flashes or stays lit continuously. This indicates excessive misfiring or a malfunction in the engine.
Care Care Suitable car-care products Use the cleaning and car-care products available at your MINI Dealer.< Cleaning agents may contain hazardous or health-damaging substances. Follow the warning and hazard instructions on the packaging. For interior cleaning, always open the doors or windows of the vehicle. Do not use any products that are not intended for cleaning the vehicle.< Always use a deicer spray to remove accumulated ice and snow; never use a scraper. Use window de-icers.
Clean fine wood trim and fine wood parts with a damp cloth only. Wipe dry with a soft cloth. Leather care The leather* used by the manufacturer of your MINI is a high quality natural product processed according to the latest methods in leather preparation. Plastic parts These include: > Plastic surfaces Dust and road grit in the pores and folds of the leather have an abrasive effect, leading to increased wear and causing the leather surface to become brittle prematurely.
Replacing components Replacing components Onboard tool kit The onboard tool kit is stored in a compartment underneath the cargo area floor panel. Wiper blades Changing the front wiper blades Changing rear wiper blade 1. Fold up the wiper arm. 2. Rotate the wiper blade toward the back as far as it will go, arrow. 3. Press the wiper blade against the limit and thus out of the mounting. 4. Press the new wiper blade into the fixture until it engages audibly. 1. Fold up the wiper arm.
For any bulb replacement not described below, contact a MINI Dealer or a workshop that has specially trained personnel working in accordance with the specifications of the MINI manufacturer.< For checking and adjusting headlamp aim, please contact your MINI Dealer.< Be careful when installing the cover, otherwise leaks could occur and cause damage to the headlamp system.< Accessing the lamp from the engine compartment The low-beam/high-beam bulb can be changed from the engine compartment.
Replacing components 3. Fold the retaining clip to the side, arrow 3. 3. Remove the inside cover. To do so, turn the cover counterclockwise. 4. Remove the bulb. 5. Insert the new bulb with the tab facing up, arrow 4. 4. Screw out the bulb counterclockwise. 6. Fold back and lock the retaining clip. 7. Reattach the cover. Turn signal indicators, parking lamps, roadside parking lamps and fog lamps Accessing the lamps via the wheel well 5.
Replacing a fog lamp bulb Tail lamps H8 bulb, 35 watts 1. Turn in the wheel. At a glance 2. Remove cover 2. To do so, turn the cover counterclockwise. Side turn signal indicators 5 watt bulb, W 5 W Brake lamp/tail lamp 21 watt/5 watt bulb, W 5 W 2 Turn signal lamp 21 watt bulb, P 21 W 3 Backup lamp 21 watt bulb, P 21 W Replacing 1. Remove the cover from the sidewall of the cargo area. 2. Screw out the bulb holder counterclockwise. Driving tips 1.
Replacing components Repairing a flat tire Rear fog lamp* 2 watt bulb, P 21 W Access to the lamp via the back or underside of the bumper. The illustration shows the fog lamp in the bumper of the MINI Cooper. 1. Screw out the bulb holder counterclockwise. 2. Screw out and replace the bulb. 3. To insert the new bulb and bulb holder, proceed in reverse order.
Wrench, screwdriver/Phillips screwdriver, towing eyelet 7 Compressor, hose with manometer and plug for cigarette lighter socket 8 Package with filling hose, valve remover and valve core Use of the MINI Mobility System may be ineffective if the tire puncture measures approx. 1/8 in/4 mm or more. Contact the nearest MINI Dealer if the tire cannot be made drivable with the MINI Mobility System.
Replacing components Distributing liquid sealant Immediately drive for approx. 10 minutes, so that the liquid sealant is uniformly distributed. Do not exceed a speed of 35 mph/ 60 km/h. If possible, do not drive at a speed lower than 12 mph/20 km/h.< Changing wheels Tire change set for space-saver spare tire* Checking tire inflation pressure 1. After driving for approx. 10 minutes, pull over at a suitable location. 2. Screw the hose with manometer back onto the tire valve. 3.
The screw connection of the space-saver spare tire is in the cargo area under the floor mat, on the base of the storage compartment for the tire change set. 9. Pull the space-saver spare tire underneath the vehicle out towards the rear. At a glance Removing the space-saver spare tire 1. Unscrew the screw connection with the special wrench. 2. Take out the cover panel. 11. Unscrew the valve extension from the valve of the space-saver spare tire. Driving with the space-saver spare tire Drive cautiously.
Replacing components Only change the tire when parked on a surface that is level, firm and not slippery. The vehicle or the jack could slip sideways on soft or slippery support surfaces, such as snow, ice, flagstones, etc. Do not use a wooden block or similar object as a support base for the jack, as this would prevent it from extending to its full support height and reduce its load-carrying capacity.
Ampere rating. To do this could cause a fire in the vehicle resulting from a circuit overload.< Have any work on the battery, including battery replacement, carried out only by a MINI Dealer or a workshop that has specially trained personnel working in accordance with the specifications of the MINI manufacturer.< A fuse allocation diagram is located on the inside of the fuse box cover panels.
Giving and receiving assistance Giving and receiving assistance Roadside Assistance The Roadside Assistance service is there to assist you around the clock in the event of a breakdown, including on weekends and public holidays. The phone numbers of the Roadside Assistance in your home country can be found in the Contact brochure. First aid pouch* Press the tab to take it out.
4. Disconnect the jumper cables by reversing the above connecting sequence. If necessary, have the battery checked and recharged. Negative terminal Connect the jumper cables in the correct order, so that no sparks which could cause injury occur.< 1. Open the cover over the battery in the engine compartment. 2. Attach one terminal clamp of the plus/+ jumper cable to the positive terminal of the battery or a starting-aid terminal of the vehicle providing assistance. 3.
Giving and receiving assistance Front Towing with a tow bar The towing vehicle must not be lighter than the towed vehicle, otherwise it may be impossible to maintain control.< The tow fittings used should be on the same side on both vehicles. Should it prove impossible to avoid mounting the tow bar at an angle, please observe the following: > Clearance and maneuvering capability will be sharply limited during cornering. > The tow bar will generate lateral forces if it is attached offset.
Vehicles with a catalytic converter should only be tow-started when the engine is cold, vehicles with an automatic transmission cannot be towstarted at all. At a glance If the electrical system fails, do not tow or tow-start the vehicle, as it would be impossible to release the electric steering-wheel lock and the vehicle could not be steered.< 1. Switch on hazard warning flashers, comply with local regulations. 2. Switch on the ignition, page 35. 3. Shift into 3rd gear. Controls 4.
Indicator and warning lamps Indicator and warning lamps Indicator and warning lamps appear in indicator area 1 and on display 2. See the table for information on causes and how to react. Note whether a lamp comes on alone or in combina1 2 Cause tion with another. Some lamps can light up in different colors. Corresponding distinctions are made in the text.
Cause Ignition switched on and driver's door open What to do Switch off the ignition, page 35, or close the driver's door. At a glance 2 Lamps still on Roadside parking lamps on Controls Door open Bonnet open Gas cap missing or loose Make sure that the gas cap is correctly positioned and close it until it audibly clicks. Do not jam the strap between the gas cap and the vehicle. Window washer fluid level too low Add washer fluid as soon as possible, page 42.
Indicator and warning lamps 1 2 Cause What to do Belt tensioners and/or airbag system failed Have the system checked immediately. Fasten the safety belts anyway. Power steering failed You can continue your journey, but moderate your speed and exercise due caution. Steering response will be markedly different. Have the system checked without delay. Lights up: Emergency calling system failed or malfunctioning Have the system checked as soon as possible.
2 Cause What to do Indicator lamp 1 flashes: Engine malfunction under high load. High engine load will result in damage to the catalytic converter You can continue your journey, but moderate your speed and exercise due caution. Have the vehicle checked without delay. At a glance Indication in Canadian models Engine malfunction with adverse effect on exhaust emissions You can continue your journey, but moderate your speed and exercise due caution. Have the vehicle checked as soon as possible.
Indicator and warning lamps 1 2 Cause What to do Indication in US models Parking brake applied Indication in Canadian models Parking brake applied Indication in US models Lights up in red: Brake fluid level too low Brake pedal travel may be markedly longer. Stop immediately. Contact the nearest MINI Dealer. Lights up in yellow: Hill Start Assist failed. The car will not be held in place after the brake is released Have the system checked as soon as possible.
2 Cause What to do Have the condition of the brake pads checked without delay. Indication in US models Vehicle electronics failed You cannot continue your journey. Contact your MINI Dealer. Indication* in Canadian models Vehicle electronics failed You cannot continue your journey. Contact your MINI Dealer. Controls Brake pads worn At a glance Indication in Canadian models Vehicle electronics failed You cannot continue your journey. Contact your MINI Dealer.
Indicator and warning lamps 1 2 Cause What to do Flashing: Automatic Stability Control ASC or Dynamic Stability Control DSC is controlling drive and braking forces, refer also to page 53 Automatic Stability Control ASC or Dynamic Stability Control DSC deactivated, refer also to page 53 Driving stability limited during acceleration and cornering. Driving style must be adjusted. Suspension control system failed, refer also to page 55 Driving stability limited during acceleration and cornering.
Cause What to do The driving stability control systems, including ABS and the Flat Tire Monitor, have failed, refer also to page 55 You can continue your journey. Drive cautiously and think well ahead. Avoid braking with full force, driving on rough tracks, and depressing the accelerator pedal to full throttle or kick-down position. Have the system checked immediately. At a glance Indication* in Canadian models > Tire damage Carefully bring the car to a stop.
Indicator and warning lamps 1 2 Cause What to do Lights up in red: > Transmission limp-home program active with restricted range of gears, possibly with reduced acceleration You can continue your journey, but moderate your speed and exercise due caution. Have the system checked without delay. > Gears can be engaged without depressing the brake Always depress the brake to engage a gear.
Cause What to do Selector lever position P not engaged. Ignition cannot be switched off Engage selector lever position P when you wish to switch off the ignition, page 35. Lights up in red: Electric steering wheel lock malfunctioning The engine can no longer be started. If applicable, do not switch off the engine. Contact your MINI Dealer. At a glance 2 Cruise control system failed Have the system checked. Park Distance Control failed Have the system checked.
Indicator and warning lamps 1 2 Cause What to do Lights up in red: Service appointment overdue Arrange a service appointment. Check service requirements, page 49. Lights up in yellow: Service due Arrange a service appointment. Check service requirements, page 49. No service due Set speed limit exceeded Time and date no longer correct 126 Set the time and date, page 50. Online Edition for Part no.
At a glance Controls Driving tips Mobility Reference Online Edition for Part no.
Online Edition for Part no.
At a glance Controls Driving tips Mobility Reference Reference Online Edition for Part no.
Technical data Technical data Engine data Displacement cu in/cmµ Number of cylinders Maximum power output hp at engine speed rpm Maximum torque lb ft/Nm with overboost function at engine speed rpm with overboost function 130 MINI Cooper MINI Cooper S 1,598 1,598 4 4 118 172 6,000 5,500 114/155 177/240 – 192/260 4,250 1,600-5,000 – 1,700-4,500 Online Edition for Part no.
Driving tips Controls At a glance Dimensions Reference Mobility All dimensions given in inches/mm. Smallest turning circle diam.: 35 ft 10 in/10.7 m. Figures following the semicolon: values that differ for the MINI Cooper S. Online Edition for Part no.
Technical data Weights MINI Cooper MINI Cooper S Curb weight, ready for travel, with all optional extras > Manual transmission lbs/kg 2,546/1,155 2,668/1,210 > Automatic transmission lbs/kg 2,634/1,195 2,723/1,235 > Manual transmission lbs/kg 3,362/1,525 3,483/1,580 > Automatic transmission lbs/kg 3,450/1,565 3,538/1,605 Approved front axle load lbs/kg 1,929/875 1,984/900 Approved rear axle load lbs/kg 1,653/750 1,664/755 Approved roof load capacity lbs/kg 165/75 165/75 Cargo
Capacities Liters Fuel tank Notes Fuel grade: page 85 10.6/– approx. 40 > MINI Cooper S 13.2/– approx. 50 including reserve of 2.1/– approx. 8 Window washer system incl. headlamp washer system –/4.8 approx. 4.5 For more details: page 42 Reference Mobility Driving tips Controls > MINI Cooper At a glance US gal/US quarts Online Edition for Part no.
From A to Z From A to Z Index A ABS Antilock Brake System 54 Accessories, refer to Your individual vehicle 5 Activated-charcoal filter for automatic climate control 68 Additives – coolant 96 – engine oil 96 Adjusting temperature inside the car, refer to Air conditioner 65 Adjusting temperature inside the car, refer to Automatic climate control 66 Airbags 57 – sitting safely 28 – warning lamp 58 Air conditioner 64 Air conditioning mode – air conditioner 65 – automatic climate control 66 – ventilation 68 Air
Online Edition for Part no.
From A to Z Connecting vacuum cleaner, refer to Connecting electrical appliances 72 Consumption, refer to Average fuel consumption 45 Consumption display – average fuel consumption 45 Control Display – settings 46 Controls and displays 10 Convenience start, refer to Starting the engine 36 Convenient access 24 – replacing the battery 25 – what to observe before entering a car wash 25 Convenient operation – windows 20 Coolant 96 – checking level 96 – filling 96 Coolant temperature 44 Cooling, maximum 67 Cool
Failure messages, refer to Check Control 51 Failure of an electrical consumer 111 Fastening safety belts, refer to Safety belts 30 Fasten safety belts reminder, refer to Seat belt reminder 31 Garage door opener, refer to Integrated universal remote control 69 Gasoline – refer to Average consumption 45 Gasoline, refer to Required fuel 85 Gasoline display, refer to Fuel gauge 45 Gear indicator – automatic transmission with Steptronic 37 Gear shifting – automatic transmission 37 – manual transmission 37 Gears
From A to Z Headlamp control, automatic 59 Headlamp flasher 39 – indicator lamp 11, 116 Headlamps – replacing bulb 103 Headlamps, care 100 Head restraints 30 – sitting safely 28 Heated – mirrors 31 – rear window 65, 67 – seats 30 Heating 64 – mirrors 31 – rear window 65, 67 – seats 30 Heavy loads, refer to Stowing cargo 80 Height, refer to Dimensions 131 Height adjustment – seats 29 – steering wheel 32 High beams 61 – headlamp flasher 61 – indicator lamp 116 – replacing bulb 103 High water, refer to Drivin
N Neck support, refer to Head restraints 30 Nets, refer to Storage compartments 71 New tires 92 Number of cylinders, refer to Engine data 130 Nylon rope, refer to Tow rope 114 P Paintwork, care 100 Parking – vehicle 36 Parking aid, refer to PDC Park Distance Control 53 Parking brake 37 Parking lamps, replacing bulb 104 Parking lamps/low beams 59 Parts and accessories, refer to Your individual vehicle 5 Online Edition for Part no.
From A to Z Pathway lighting 59 PDC Park Distance Control 53 Personal Profile 18 Plastic parts, care 101 Pollen – refer to Microfilter/activatedcharcoal filter for automatic climate control 68 – refer to Microfilter for air conditioner 66 Power failure 111 Power windows 26 Power windows, refer to Windows 26 Pressure, tires 86 Pressure monitoring, tires 55 – Flat Tire Monitor 55 Puncture – Flat Tire Monitor 55 R Radio key, refer to Integrated key/remote control 18 Radio position, refer to Radio readiness 3
At a glance Controls Storage space – cargo area 78 – storage compartments 71 Storing the vehicle 101 Storing tires 93 Stowage, refer to Storage compartments 71 Summer tires, refer to Wheels and tires 86 Switches, refer to Cockpit 10 Switching off – engine 36 Switching off the engine – start/stop button 35 Switching the cooling function on and off 68 Symbols 4 Tachometer 44 Tailgate 23 – convenient access 24 – emergency operation, refer to Opening manually 23 – opening/closing 23 – opening from outside 23
From A to Z Temperature of coolant, refer to Coolant temperature 44 Temperature setting – air conditioner 65 – automatic climate control 67 Tensioning straps, refer to Securing cargo 80 The individual vehicle 5 Third brake lamp, refer to Center brake lamp 106 Three-point safety belt 30 Tightening the lug bolts – keys 108 – torque 110 Tightening torque, refer to Tightening the lug bolts 110 Tire change set – MINI Mobility System 108 – space-saver spare tire 108 Tire failure – MINI Mobility System 106 – spac
At a glance Controls X Online Edition for Part no.
Online Edition for Part no.
Refueling So that you always have access to the data you need when refueling, you are recommended to enter the relevant figures for your car in the table provided below. Consult the index for individual specifications. Fuel Quality Enter your preferred fuel quality here. Engine oil Preferred oil specifications Do not add engine oil until the corresponding message appears, refer to page 96.
01 41 0 013 096 ue Basis *BL001309600F* DRIVE ME. Online Edition for Part no.
