Specifications

www.ripmax.com
Distributed to all good model shops by: See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
65
P-SBS/01A FASSTest Telemetry Air Pressure Sensor ..£49.99
P-SBE-1 S-Bus Adapter GY750 .............................. £49.99
The new SBE-1 S-Bus Encoder is
designed to interface between a receiver
with standard outputs and the GY-750,
converting the normal receiver output to
the digital input stream required by the
gyro, thus enabling standard Futaba and
other manufacturer's receivers to be used.
P-FTM/FH Tx Module 2.4GHz S-FHSS 7/8/9/10C ......... £79.99
P-R2106GF/2-4G 6ch Rx Micro 2.4GHz FHSS (Air) ........ £29.99
P-RPS-10 Receiver Power Regulator (10 Amps) ........ £64.99
P-R6203SBE/2-4G 3/18ch Rx (S-Bus/Mid Range) 2.4GHz £59.99
P-S9075SB Servo Std S-Bus/PWM - 0.14s/30.6Kg ....... £129.99
P-SBC-LEAD S-Bus Rx/Gyro Link Lead.........................£2.99
A standard link lead suitable for
many applications and especially
suited for S-Bus connection.
This new Futaba S-FHSS
module has been developed for
use with a wide range of modular
transmitters, ranging from the
original FF7 through the FF8, 9C
and 10C systems, enabling these
transmitters to operate Futaba's
new S-FHSS low cost receivers and the brand new FTR
series of aircraft and helicopters.
Primarily developed for helicopter
usage but equally suitable for fixed
wing models, this tiny new mid range
FASST receiver weighs only 6.3g,
but in S-Bus mode it offers 18
channel output! (3 channels
in PWM mode) an is
designed for small to
medium sized models.
Wingspan: 6.3g
Channels: 3 (PWM)/18 (S-BUS)
Dimensions: 22.5 x 37.4 x 9.3mm
The most powerful S-Bus programmable
servo available! The new S9075SB servo
is exceptionally powerful - offering over
30 kg/cm torque - so is perfect for the
most demanding applications.
Weight: 71g
Dimensions: 41 x 21 x 37mm
Speed: 0.14 sec/60° (6.0v)
Torque: 30.6kg/cm (6.0v)
This new 6 channel receiver is perfect for all type of park fly
models, both fixed wing and helicopters. Weighing only 4
grams and with extremely compact dimensions
this new FHSS receiver is already
very popular!
Range: 300mm
Dimensions: 38 x 21 x 10mm
Weight: 4g
Voltage: 4.8 - 7.4V
Frequency: 2.4GHz FHSS
Channels: 6 Channels
P-SBS/01T FASSTest Telemetry Temp Sensor...............£59.99
P-SBS01RO FASSTest Telemetry Optical RPM Sensor...£39.99
P-SBS/01RM FASSTest Telemetry Magnet RPM Sensor...£39.99
TX MODULE 2.4ghz S-fhss 7/8/9/10c
Futaba FASSTEST TELEMETRY
The new Futaba 18MZ radio incorporates telemetry as
standard when used with the R7008SB receiver, offering
on-board radio voltage, external voltage and signal strength
data, however for those pilots needing even more information
Futaba have developed additional telemetry sensors that
connect to the R7008SB receiver.
Temperature sensor with a range from -20 to +200°C.
Magnetic RPM sensor with a range from 360 to 50,000 RPM.
Optical RPM sensor with a range from 360 to 300,000 RPM
(relative to no. of blades – 180,000 RPM with 2 blades)
Altitude/Variometer sensor (0 to 5,000 metre altitude and +
150 m/S Vario range)
S-BUS rx/gyro link lead
R2106GF 6CH RX MICRO 2.4GHz FHSS (Air)
Servo Std S-BUS/PWM 0.14S/30.6KG
R6203SBE/2-4G 3/18CH RX (S-BUs)
SBE-1 S-BUS ADAPTER GY750
PS-10 RECEIVER POWER REGULATOR (10A)
Perfect for those wanting to
take advantage of the light
weight and high capacities
of the latest Li-Po and Li-Fe
battery packs, but running
4.8-6.0v receivers and servos,
the new PS-10 voltage regulator
from Futaba converts input voltages
from 6.0v to 12.6v to a constant 5.2v
output to the receiver/servos, with
a maximum continuous current of
7.0Amps and peak of 13.0Amps. A bonus is the increase in
receiver/servo reliability due to the non varying nature of the
output voltage, eliminating the high initial peak voltage of a
freshly charged battery.