Specifications

www.ripmax.com
Distributed to all good model shops by: See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
57
HELICOPTERS
AIRCRAFT
CARS
These light sets will add a level of scale realism to your models
and are extremely easy to install. Using long life, super-bright
(3 & 5mm diameter) LEDs, you won’t fail to see any model
they’re installed in! All LEDs or LED combinations have
separate plugs fitted, so can be moved around for different
lighting effects!
Set 1 is for aircraft and helicopters and features beacon, navigation and
strobe lighting. Set contents: Main Control Board, 2 x White LEDs,
1 x Green LED, 1 x Red LED, 2 x White Strobe LEDs, 2 x Slow Flashing
Red LEDs and Mounting Kit.
Set 2 is for cars and features headlights, tail lights, steering signals
and brake lights, all controlled from your transmitter! Set contents: Main
Control Board, 2 x Y-Lead, 2 x White LEDs, 2 x Red LEDs, 2 x Orange
LEDs and Mounting Kit.
Set 3 is for cars and features 4 setting options; always on or one of three
combination flashing sequences to mimic pace cars, low riders, monster
trucks - the only limit is your imagination! LEDs can be switched around
as required to suit different applications. Switch operated. Set contents:
Main Control Board, 6 x White LEDs, 2 x Blue LEDs, 2 x Red LEDs, 2 x
Yellow LEDs, 1 x Y-lead, 1 x Mode Selection Switch and Mounting Kit.
Input Voltage for all sets: 4.8~6V (Recommend 6V for maximum
brightness). This can be from your receiver or a separate power source.
Adds an extra touch of realism
and drama to y0ur model!
AC or
DC Input
Capability!
The Quattro is built into a sturdy
aluminium case with extensive cooling
fins and fan to handle the 50W charge
per charger that it can handle. That's a
total of 200W! Perfect for the modeller
who is in need of charging batteries of
different types simultaneously.
Four B6+ chargers all built into one compact case,
now mains AC or 12-18v DC input for even greater
capability! Each charger has its own display
screen and programming buttons for complete,
independent control as well as its own
balance port for Lithium type battery
balancing and one balance board
for XP and TP plugs is supplied
(others are available as
options). Two of the chargers
have a temperature sensor
socket which also doubles as
a PC interface socket when
option sensors and cables are
used.
Specifications
AC Input: 100- 240v Charge Current: 0.1 - 6.0A
DC Input: 11 - 18v NiMH Cell Count: 1 - 15
Max Power: 50W x 4 LiPo Cell Count: 1 - 6
Max Discharge: 5W x 4 PB Battery Voltage: 2 - 20V
O-SKYCHB6QAC SkyRC IMAX Quattro B6 AC Charger ................... £189.99
GT POWER LIGHTING SETS
C-GTLSC1 GT Power Car Lighting Set - Scale ............. £11.99
C-GTLSC2 GT Power Car Lighting Set - Flashing ....... £13.99
C-GTLSC3 GT Power Car Lighting Set - Wheels............ £5.99
F-GTLSA1 GT Power Aircraft Lighting System ........... £10.99
O-IPBAL-HXL2 Adaptor Lead for HEX - RED JST ................£1.99
Charge 4 Batteries
Simultaneously!