Instruction manual

10
FliGhT ConTRolS
TAKING OFF
If you have never flown an R/C helicopter before, we recommend learning to
fly in the beginner mode before progressing to advanced mode. See page 7 for
information on how to switch between the modes.
1. Gently move the throttle stick up. The main rotor blades will start to spin.
2. Keep advancing the throttle stick until the helicopter leaves the ground.
3. To begin with, move the throttle stick up and down in very small movements to
find the correct amount of throttle to keep the helicopter at a constant height.
4. If you get into trouble or loose orientation, slowly move the throttle stick to its
lowest position and the helicopter rotors will slow down and stop spinning and
the helicopter will land. This is a much better option than allowing the helicopter
to crash into something with the rotor blades spinning.
LEFT-RIGHT ROTATION
1. Now that you have the helicopter hovering you can learn to turn it around by
using the yaw control.
2. To make the nose turn to the left, move the stick to the left. Centre the stick to
stop the helicopter rotating to the left.
3. To make the nose turn to the right, move the stick to the right. Centre the stick to
stop the helicopter turning to the right.
Yaw left
- Rotate nose to the Left
Yaw right
- Rotate nose to the Right