User guide

Mini PTZ Dome Camera User Guide

Document 800-06705 - Rev A - 12/10

Motion Setup

Sets the general functions of pan/tilt motions.

z Motion Lock [ON/OFF]

If Motion Lock is set to ON, it is impossible to set

up or delete Preset, Swing, Pattern and Group. It is

only possible to run those functions

z Power Up Action [ON/OFF]

Refer to “Other Functions" section.

z Auto Flip [ON/OFF]

Refer to “Other Functions" section.

z Jog Max Speed [1°/sec ~360°/sec]

Sets the maximum jog speed. The Jog speed is

inversely proportional to the zoom magnifications.

As the zoom magnification increases, the pan/tilt

speed decreases.

z Jog Direction [INVERSE/NORMAL]

Sets the jog direction. If this is set to INVERSE, the

view direction displayed on the screen is same as

the direction of joystick. If the jog direction is set to

NORMAL, the view direction in the screen is the

reverse direction of joystick.

z Freeze in Preset [ON/OFF]

Sets Frame Freeze function. This feature freezes

the scene on the monitor when going to a Preset.

At the start point of a Preset movement, the

camera starts freezing the image of the start point.

The camera keeps displaying the image of the

start point during Preset movement and does not

display the images acquired during the movement.

As soon as camera stops at the Preset end point,

the camera begins displaying live images acquired

during the movement. This feature reduces

bandwidth when working with digital systems or

digital network systems.

MOTION SETUP

------------------------

MOTION LOCK OFF

PWR UP ACTION ON

AUTO FLIP ON

JOG MAX SPEED 120/SEC

JOG DIRECTION INVERSE

FRZ IN PRESET OFF

BACK

EXIT