User guide

36
z IRIS [AUTO/MANUAL(0~100)]
Sets Iris to operate automatically or at a user-defined
level. Auto Iris is the lens function that automatically
opens or closes the iris in response to changing light
conditions. If Iris is set to Auto, Iris has higher priority
in adjusting Auto Exposure, and Shutter Speed is
fixed.
If Iris is set to Manual, Iris is fixed and has lower
priority in adjusting Auto Exposure. The Iris level
range is 0 ~ 100.
z Shutter Speed [ESC/A.Flicker/Manual(×128~1/120000 sec)]
Sets Shutter Speed. Shutter Speed is the duration of
the electronic shutter. If Iris is set to Manual and
Shutter Speed is set to ESC, Shutter Speed has
higher priority. If Shutter Speed is set to A.Flicker, to
remove Flicker, Shutter Speed should be set to 1/100
sec. for NTSC and 1/120 for PAL.
z AGC [OFF/NORMAL/HIGH]
Sets Auto Gain Control (AGC). This setting enhances
image brightness automatically in the event that the
luminance level of the image signal is too low.
z SSNR [OFF/LOW/MIDDLE/HIGH]
Sets Samsung Super Noise Reduction (SSNR). This
setting enhances the images by deducting noises
when the gain level of the images is too high.
z SENS-UP [AUTO(2~128)/OFF]
Sets Sens-up. This setting activates the Slow Shutter
function when the luminance of the image (signal) is
too dark.
It is possible to set up the maximum number of frames
piled one upon another by using the Slow Shutter
function.
OSD Menu