User guide

Mini PTZ Dome Camera User Guide
Document 800-06705 - Rev A - 12/10
35
 White Balance Setup
 Auto Exposure Setup
z WB Mode [AUTO/MANUAL]
Retains color balance over a color temperature range.
In Auto mode, this feature automatically processes the
viewed image. In Manual mode, red and blue levels
can be set up manually.
z Red Adjust [10~50]
Adjusts the picture output in the red range.
z Blue Adjust [10~60]
Adjusts the picture output in the blue range.
z Backlight [ON/OFF]
Enables or disables Backlight Compensation. If bright
backlighting is present, the subjects in the picture may
appear dark or as a silhouette. Backlight
compensation enhances objects in the center of the
picture. The camera uses the center of the picture to
adjust the iris. If there is a bright light source outside of
this area, it will wash out to white. The camera will
adjust the iris so that the object in the sensitive area is
properly exposed.
z Day/Night [AUTO1/AUTO2/DAY/NIGHT]
Day and Night mode. You can increase sensitivity in
low-light conditions by switching to black/white mode
(removing the IR cut filter or turning on DSS). Color
mode is preferred in normal lighting conditions. The
time to change a mode is 10 sec.
# AUTO1 mode: The sensitivity to change a mode is
fixed.
# AUTO2 mode: The sensitivity to change Night mode
to Day mode is adjustable. The sensitivity range is
1~255. The higher the numeric value selected, the
lower the light levels at which Night mode changes to
Day mode. If this is set to AUTO2 mode, ACG is fixed
to HIGH.
z Brightness [0~100]
Adjusts the brightness of the images. Iris, Shutter
Speed, and Gain are adjusted automatically.
WB SETUP - GLOBAL
------------------------
WB MODE AUTO
RED ADJUST ---
BLUE ADJUST ---
BACK
EXIT
AE SETUP - GLOBAL
------------------------
BACKLIGHT OFF
DAY/NIGHT <AUTO2>
BRIGHTNESS 25
IRIS AUTO
SHUTTER ESC
AGC HIGH
SSNR MIDDLE
SENS-UP <AUTO>
BACK
EXIT