User guide

OSD Menu

Quick Programming Guide

z The menu items with < > always have sub-menus.

z To go to sub-menus or make the cursor move to the right, press the NEAR key.

z To go to previous upper level menus, press the FAR key.

z To make a selection, press the NEAR key

z To cancel a selection, press the FAR key

z To move the cursor in the menu, move the joystick to move in an

Up/Down direction or in a Left/Right direction.

z To change a value, move the joystick up or down.

z To save changes, press the NEAR key.

z To cancel changes, press the FAR key.

Main Menu

z System Information Displays the system information and

configuration. The system setting can not be

changed using the OSD menu and the

information is for reference only.

z Display Setup Enables the user to program how labels are

displayed on the monitor.

z Dome Camera Setup Enables the user to configure various functions

of the camera.

z System Initialize Initializes all system configurations and all data

to the factory default parameters.

SPEED DOME CAMERA

------------------------

EXIT

OSD Menu