User guide

26
OSD Menu
z Function Using the OSD menu, the system can be properly configured for each application.
z Entering into OSD Go Preset [95]
Reserved Presets (Hot Keys)
Some Preset numbers are reserved to change some parameters without entering the OSD menu.
Pelco-D protocol
z Hot Keys Go Preset [95] : Enters OSD menu
Go Preset [131~134] : Runs Pattern functions 1 ~ 4
Go Preset [141~148] : Runs Swing functions 1 ~ 8
Go Preset [151~158] : Runs Group functions 1 ~ 8
Go Preset [167] : Sets Zoom Proportional functions to ON
Set Preset [167] : Sets Zoom Proportional functions to OFF
Go Preset [170] : Sets Camera BLC mode to OFF
Go Preset [171] : Sets Camera BLC mode to ON
Go Preset [174] : Sets Camera Focus mode to AUTO
Go Preset [175] : Sets Camera Focus mode to Manual
Go Preset [176] : Sets Camera Focus mode to SEMI-AUTO
Go Preset [177] : Sets Day & Night mode to AUTO
Go Preset [178] : Sets Day & Night mode to NIGHT
Go Preset [179] : Sets Day & Night mode to DAY
Go Preset [190] : Sets OSD Display mode to AUTO
Go Preset [191] : Sets OSD Display mode to OFF
Go Preset [192] : Sets OSD Display mode to ON
Note) When the Zoom Proportional function is enabled, the jog speed of the pan/tilt motion is determined by the zoom
magnification ratio.
Operation