User guide

In-Ceiling Mount Installation

c Remove the ceiling tile from the ceiling and attach

the Guide Pattern to the ceiling tile. Then cut a hole

whose diameter is 116 mm and three holes for

M4x30 on the ceiling tile.

d Install the main body with the In-Ceiling Plate, the

three screws (M4x50) and the three nuts (M4).

Then install the ceiling tile to the ceiling and

connect the main cable to the main port.

e Align the dome cover stud with the stud on the main

body and slightly push the dome cover to the

ceiling tile.

f Turn the dome cover clockwise and install the dome

cover lock-up screw. Then remove the protective

vinyl from the dome cover. (Machine M3×6)

Important Notice

z Before starting the installation, make sure that the camera ID and protocol are set up properly.

Installation